You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design and Alpha Test of In-water Collection and Removal of Floating Debris System

    SBC: D & D Products Incorporated            Topic: 1C

    D&D Products Inc. will design and develop an in-situ floating debris capture device. The device will be located at the edge of a stream, canal or similar waterbody. Floating booms will be attached to the device, and the waterway current will guide debris along the booms into the gathering head. The gathering head will direct debris into the hopper and feed it onto a conveying mechanism. The convey ...

    SBIR Phase I 2023 Environmental Protection Agency
  2. Additively-Manufactured Insulated Propulsion Components (AMIPC)

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA21T005

    In Phase II, Exo-Atmospheric Technologies, LLC (EXO) will team up with multiple propulsion providers to fabricate throat inserts, pintles, and other structural components to verify and validate their Additively-Manufactured Insulating Propulsion Component (AMIPC) technology. EXO will use analysis tools to create components optimized for thermal insulation and structural performance utilizing multi ...

    SBIR Phase II 2023 Department of DefenseMissile Defense Agency
  3. Additively Manufactured Insulated Throat Insert (AMITI)

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA21T005

    In Phase I, Exo-Atmospheric Technologies, LLC (EXO) and their research partner Purdue University (Purdue) will fabricate two additively manufactured (AM) throat inserts, optimized for thermal insulation and structural performance using Topology Optimization, that are to be filled and consolidated with a high temperature ceramic. The assembly will undergo a hot isostatic press (HIP) procedure at Ex ...

    STTR Phase I 2022 Department of DefenseMissile Defense Agency
  4. A Low-cost Handheld Sulfur Dioxide Tester with a Hybrid Nanomaterials-based Sensor Chip

    SBC: NANOAFFIX SCIENCE LLC            Topic: 20OSAPEP2

    This SBIR Phase II project aims to further advance the progress made during phase I toward the development of a portable handheld detector for real-time onsite detection of sulfur dioxide (SO2). SO2 is an air pollutant, which can adversely affect respiratory and cardiovascular health in humans. Onsite monitoring of SO2 would enable real-time detection of chronic and acute exposure to this toxic ga ...

    SBIR Phase II 2021 Environmental Protection Agency
  5. A Low-cost Handheld Sulfur Dioxide Tester with a Hybrid Nanomaterials-Based Sensor Chip

    SBC: NANOAFFIX SCIENCE LLC            Topic: 19NCER2B

    This SBIR Phase I project aims to develop an affordable handheld tester to meet the need for real-time, onsite detection of sulfur dioxide (SO2) in the air. The handheld tester integrates a novel micro-sized sensor chip with a portable digital meter for direct readout of testing results. The sensor chip is built upon a sensing platform with graphene-tin oxide nanoparticle hybrids as the sensing ma ...

    SBIR Phase I 2020 Environmental Protection Agency
  6. High Efficiency Hypersonic Control Flap (HEHCF) for High-G Manuevering

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18T002

    Hypersonic vehicles operate at high-temperature, in a highly viscous flow field, for extended duration. Shock waves and boundary layers interact (SBLI) at the control surfaces of these vehicles and further increase viscous drag and aerothermal heating compared with the base vehicle. The SBLI also dramatically raises the achievable pressure ratio at the control surface if well controlled. Over long ...

    STTR Phase II 2020 Department of DefenseMissile Defense Agency
  7. Addditive-manufactured Low-Cost Upper-stage Propellant (ALCUP) Tank

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18021

    An Additive-manufactured, Low-Cost, Upper-stage Propellant (ALCUP) tank architecture is proposed that integrates different AM techniques to produce a scalable, modular tank architecture which allows for incorporation of different tank features required to retain mission flexibility, while utilizing advanced concepts to decrease inert fraction. The innovative design and manufacturing technique util ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  8. High Efficiency Hypersonic Control Flap

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18T002

    High G Aerodynamic Controls | Approved for Public Release 18-MDA-9707 (3 Jul 18)

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  9. Hypergolic Hydrocarbon Engine

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18T005

    Development of novel propulsion systems in the past two decades has focused almost exclusively on cryogenic boost-phase systems (LOX/LH2, LOX/LCH4, and LOX/RP-1) for launchers and uppers stage engines, and Attitude / Reaction Control Systems (A/RCS) for in-space applications using green monopropellants such AF-M315E or LMP-103S. Basic research and development of scalable, non-toxic, non-cryogenic, ...

    STTR Phase I 2019 Department of DefenseMissile Defense Agency
  10. Low-Drag Jet Vane-Thrust Vector Control for Exo-Atmospheric Propulsion Systems

    SBC: Exo-Atmospheric Technologies LLC            Topic: MDA18004

    A new type of thrust vector control (TVC) system is proposed to enable a high-performance, low-cost defense against ballistic threats. Approved for Public Release 19-MDA-10203 (4 Sep 19)

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government