You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Automated Fiber Placement (AFP) Process for Polymer Composite Sabots

    SBC: ADC Acquisition Co. dba Automated Dynamics            Topic: N/A

    Automated Cynamics Corporations (ADC) proposes to exploit its knowledge of automated in-situ consolidation of thermoplastic carbon fiber unidirectional tape to reduce the high scrap rate currently experienced in the in the fabrication of thermoset (epoxy) carbon fiber sabots. The current production process requires several steps which result in material loss (scrap) of approximately 60-70%. App ...

    SBIR Phase II 1998 Department of DefenseArmy
  2. Aircrew Management Device

    SBC: AMBULATORY MONITORING, INC.            Topic: N/A

    Aircrew management device software, based upon USAARL code and information contained in the & Caldwell, USAARL/USASC 1996) will be refined and optimized for inclusion in an improved existing activity monitoring device. A 3-year cooperative effort between the Walter Reed Army Research Institute and Precision Control Design, Inc., resulted in the func ...

    SBIR Phase I 1998 Department of DefenseArmy
  3. DAXIS--Data Analysis if X-Ray Image System-Phase II

    SBC: ANALYSIS & SIMULATION, INC.            Topic: N/A

    Analysis and Simulation, Inc. (AnSim) proposes to develop a Data Analysis of X-Ray Image System (DAXIS) software package. The software will analyze the digital data obtained from X-ray images using three analytical filters: wavelets, fractals, and artificial neural networks (ANN). Wavelet analysis will be used for (1) noise reduction, (2) determination of edges and curvatures, and (3) gray-scal ...

    SBIR Phase II 1998 Department of DefenseArmy
  4. Heavy Metal Ion Removal and Wastewater Treatment by Influence of Magnetic and Electrical Fields

    SBC: BELTRAN, INC.            Topic: N/A

    A number of arsenals and depots such as Toby Hann Army Depot, PA, and Corpus Christy Army Depot, employ electroplating technology which generates chrome, nickel and cadmium metal ions requiring removal from the wastewater. A cost-effective method is needed for removal of heavy metal ions from small plating operations. DoD grant applications are sought for the development of innovative processes fo ...

    SBIR Phase II 1998 Department of DefenseArmy
  5. Wireless & Cableless Binocular Simulator Subsystem for CCTT

    SBC: DIAMOND VISIONICS, LLC            Topic: N/A

    The US Army's stated need is to develop a Binocular Simulator for the CCTT. The CCTT is the first in a family of interoperable simulators for training a combined arms force in a real-time synthetic environment. The focus of the CCTT is sustainment training for collective tasks and skills in command, control, communication, and maneuver. Diamond Visionics Company (DVC) proposes a feasibility study ...

    SBIR Phase I 1998 Department of DefenseArmy
  6. A Real-Time Digital Optical Enhancement System

    SBC: InterScience, Inc.            Topic: N/A

    Real-time video enhancement can be accomplished in two areas. First, optics and optical systems can readily be applied to the incoming image. The nature of this solution is such that the results occur in real-time. Secondly, if the video is to be digitized, a variety of hardware and software solutions can be applied to the digital data. Processing time is the single largest constraint on digit ...

    SBIR Phase II 1998 Department of DefenseArmy
  7. A High-Performance, Direct-to-Disk Video Recording System Based on the Fibre Channel Protocol

    SBC: InterScience, Inc.            Topic: N/A

    Since its invention, the video camera has been a valuable diagnostic tool for a wide variety of military, scientific and industrial applications. Recently with the advent of digital video and the growth associated with mass media and teleconferencing, the opportunity exists to take advantage of an emerging technology to develop a high performance data acquisition system which is capable of recordi ...

    SBIR Phase I 1998 Department of DefenseArmy
  8. Dynamic Coefficients for Compliant Foil Bearings

    SBC: MOHAWK INNOVATIVE TECHNOLOGY, INC.            Topic: N/A

    The cost effective application of compliant foil bearings (CFBS) to high-speed, high-temperature vehicle propulsion systems requires an improved understanding of the factors affecting their dynamic characteristics and accurate predictions of the coefficients to be used in rotordynamic analysis of these systems. Under this program, MiTi will establish the design and test methodology necessary to c ...

    SBIR Phase I 1998 Department of DefenseArmy
  9. A Proposal for a Frequency Domain Imaging Sensor for Stand-off Chemical Detection

    SBC: OMAN MOMENTS, INC.            Topic: N/A

    Oman Moments, Inc. (OMI), a small business, offers to U.S. Army ERDEC the unique Fabry-Perot Interferometer technology developed by our teammate Northrop Grumman (NG) NG has demonstrated design, construction and performance of imaging etalons operating in low order in the infrared. Their solutions to the Phase I problems of very high mirror reflectance, flatness and alignment over a 1 ...

    SBIR Phase I 1998 Department of DefenseArmy
  10. Pneumatic Device for the Insertion of Discontinuous Reinforcement in Dry Fiber Preforms

    SBC: PNEUVENTURES, INC.            Topic: N/A

    pVi has developed a novel electropneumatic paintball gun, the Shocker+, which is currently marketed exclusively through SmartParts of Latrobe, PA. Several features of the Shocker+ are pending before the US Patent and Trademark Office. pVi has initiated development of a second generation pneumatic gun technology. Our electronically controlled and pneumatically actuated gun technology has several ad ...

    SBIR Phase I 1998 Department of DefenseArmy
US Flag An Official Website of the United States Government