You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. High-Output, Monodispersed Aerosol Particle Generation Using Microfabricated Nozzle Arrays

    SBC: Anvik Corporation            Topic: N/A

    Aerosol generation is an important leading edge technology with relevance to ballistic missile defense because of the importance of bioearosol generation technology in the development of countermeasures for defence against biological warfare. Aerosol delivery is also an important route for the transmission of naturally occurring particulate materials. The development of new technology for the effi ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  2. Preparation of Aluminum Nitride Substrates for Device Fabrication

    SBC: Crystal IS, Inc.            Topic: N/A

    We propose to prepare AlN substrates from single-crystal boules of AlN. When properly prepared, these AlN substrates should be superior to all substrates currently available commercially. In particular, the AlN substrates have significantly superior chemical compatibility, lattice/crystal structure match, thermal expansion match, and thermal conductivity when compared to sapphire substrates that ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  3. High Performance 2.5 Micron InGaAs/InP TPV Cells Based on Novel Buffer Technology

    SBC: EPITAXIAL LABORATORY INC            Topic: N/A

    Due to a mature material growth and processing technology of InP and InGaAs, lattice-mismatched 2.5 um(0.55 ev )InGaAs/InP is identified as the most promising Thermophotovoltaic(TPV) material system for the next generation of monolithic interconnected modules(MIMs). Compared to GaSb and quaternary InGaAsSb, InP and InGaAs offer many critical advantages; (l)the existence of semi-insulating InP subs ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  4. Synthesis of New Conjugated Polymers for High Performance Optoelectronic Applications

    SBC: FED CORP.            Topic: N/A

    FED Corporation proposes to design and chemically synthesize a novel type of conjugated polymer for optoelectronic applications, including organic light emitting diodes (OLED), photovoltaics, and thin film solid state lasers. This new organic material is expected to outperform the current state-of-the-art organic optoelectronic materials by virtue of its unique molecular structure featuring a doub ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  5. Suppression of Step Bunching During High Temperature Anneals of SiC

    SBC: INTERFACE STUDIES, INC.            Topic: N/A

    Many approaches to realizing the full potential of the Power Electronic Building Block rely upon the remarkable electronic properties of SiC. Almost all of these involve high temperature treatment of SiC, whether for growth, oxidation, or implant activation anneal. Unfortunately, under high temperature processing this material has demonstrated the occurrence of step bunching. This surface/interfac ...

    SBIR Phase I 1998 Department of DefenseMissile Defense Agency
  6. FOVEAL MACHINE VISION SYSTEMS

    SBC: AMHERST SYSTEMS, INC.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  7. FULL-SURFACE INTERFEROMETRIC TESTING OF GRAZING INCIDENCE MIRRORS

    SBC: E.r.g. Systems            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  8. LOW COST TWO DIMENSIONAL LASER DIODE ARRAY PRODUCTION TECHNIQUES

    SBC: Northeast Semiconductor Inc            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  9. SUBMARINE SHOCK LETHALITY STUDIES: AN OBJECTIVE APPROACH FOR LARGE STRAIN CALCULATIONS

    SBC: Thornton Tomasetti, Inc.            Topic: N/A

    ADVANCED STRUCTURAL MATERIALS USED IN THE FABRICATION OF SUBMARINES CAN SUSTAIN LARGE STRAINS DURING THE FORMATION PROCESS CAUSED BY EXPLOSIVE LOADINGS. THE COMPUTATIONAL SOLID MECHANICS COMMUNITY HAS RECENTRLY RECOGNIZED SERIOUS SHORTCOMINGS IN CALCULATIONS USING MATERIAL MODELS IN THIS LARGE STRAIN REGION. BECAUSE OF THE IMPORTANCE OF CALCULATIONS IN UNDERSTANDING THE SHOCK RESPONSE OF SUBMARINE ...

    SBIR Phase I 1989 Department of DefenseDefense Threat Reduction Agency
US Flag An Official Website of the United States Government