You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. ZnO alloy based LEDs and laser diodes

    SBC: CERMET, INC.            Topic: A09058

    Cermet proposes to demonstrate MgZnCdO based light emitting diodes on native substrates. This will be accomplished by focusing on three technical areas. First, Cermet will increase its existing p-type ZnO capability to greater than 1e18 holes per cm^3. Second, Cermet will refine alloy growth across the quaternary system to address a wide emission wavelength range. Finally, Cermet will develop ...

    SBIR Phase I 2009 Department of DefenseArmy
  2. Non-Destructive Evaluation (NDE) and Testing of Ceramic Armor

    SBC: EVISIVE LLC            Topic: N/A

    This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...

    SBIR Phase II 2009 Department of DefenseArmy
  3. Non-Destructive Evaluation (NDE) for Ground Vehicles

    SBC: EVISIVE LLC            Topic: A08144

    The objective of this proposal is to develop a robust hand-held, data acquisition system for microwave inspection of non-metallic armor on ground vehicles. The system will em-ploy the patented Evisive Scan microwave interference testing method has been dem-onstrated in a portable, work station configuration on armor panels from the Stryker and ASV vehicles. The Evisive Scan method detects laminar ...

    SBIR Phase I 2009 Department of DefenseArmy
  4. Automatic Test Equipment (ATE) for Non-Destructive Test/Non-Destructive Inspection/Non-Destructive Evaluation/Non-Destructive Test Evaluation (NDT/NDI

    SBC: EVISIVE LLC            Topic: A09114

    The objective of this proposal is to develop, demonstrate, and field a Non-Destructive Inspection (NDI) Automatic Test Equipment (ATE) for field units and depot to utilize in inspecting and/or repairing compo-site rotor blades. The NDI-ATE is to be field portable, provide results in near real time, with an automated assessment capability for field use and a detailed assessment capability for depo ...

    SBIR Phase I 2009 Department of DefenseArmy
  5. Innovative Fire Control Radar Technology for Improved Sensing and Engagement of Tactical Short-Range Airborne Threats

    SBC: PROPAGATION RESEARCH ASSOCIATES, INC            Topic: A08164

    Propagation Research Associates, Inc., (PRA) proposes an innovative distributed aperture radar technology that uses waveform diversity for effective implementation of fire control and engagement capabilities to defeat multiple attacks from any direction. Force protection against low-cost, ballistic threats imposes challenges for a Fire Control Radar (FCR) that is charged with tracking and directi ...

    SBIR Phase I 2009 Department of DefenseArmy
  6. Clutter Mitigation Techniques for Ground-Based, Gr

    SBC: PROPAGATION RESEARCH ASSOCIATES, INC            Topic: A09073

    Propagation Research Associates, Inc., (PRA) proposes to develop a basic suite of algorithms that will mitigate clutter for ground based radars detecting ground moving targets. PRA will utilize data collected by the Army Research Laboratory Compact Radar (ARL-CR) to design and analyze clutter mitigation algorithms. PRA will develop algorithms that utilize signal statistics in a rule-based algori ...

    SBIR Phase I 2009 Department of DefenseArmy
  7. Modeling Human Interfaces and Behaviors in Dismounted Soldier Training Environments

    SBC: RESEARCH NETWORK INC            Topic: A07194

    RNI with team member Technical Solutions, Inc. (TSI/TERI) is proposing a unique integrated solution to this problem. An innovative effort to design, develop and demonstrate Multi-Modal Interfaces for Synthetic Training Environments for effective training. The system will allow live humans as team or squad leaders to utilize a suite of interface devices to control and interact with automated forc ...

    SBIR Phase II 2009 Department of DefenseArmy
  8. Advanced Flow Control Actuators for Fuselage Drag Reduction

    SBC: Virtual Aerosurface Technologies, Inc.            Topic: A04082

    Virtual Aerosurface Technologies, Inc. in collaboration with Georgia Tech proposes a Phase II SBIR program for the adaptation of combustion powered actuation (COMPACT) actuators to the task of fuselage drag reduction on rotorcraft. COMPACT uses a small-scale combustion process to produce pulsed jets with a wide range of strengths and has demonstrated capability to reattach separated flows over ai ...

    SBIR Phase II 2009 Department of DefenseArmy
  9. Non-Destructive Evaluation (NDE) and Testing of Ceramic Armor

    SBC: EVISIVE LLC            Topic: A07186

    This project will develop a field portable nondestructive technique for in-situ monitoring of the health of ceramic armor. The Evisive Scan microwave interference scanning method has been successfully demonstrated in Phase I of the project, where it was demonstrated successfully on Control Specimens and ceramic armor Surrogates designed and fabricated by ARL, and on samples of armor from Stryker ...

    SBIR Phase II 2009 Department of DefenseArmy
US Flag An Official Website of the United States Government