List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Measuring Learning and Development in Cross-Cultural Competence

    SBC: 361 Interactive, Llc            Topic: A07050

    Contemporary operating environments require more cross-cultural interaction than ever before. Cross-cultural competence is critical to mission success, and traditional competence frameworks do not consider the unique demands of Army Soldiers. In Phase 1, a preliminary developmental stage model of Army mission-centric competence was developed. This model describes affective, behavioral and cogni ...

    SBIR Phase II 2009 Department of DefenseArmy
  2. Wide Temperature, High Energy Density Capacitors for Power System Conditioning

    SBC: AKRON POLYMER SYSTEMS, INC.            Topic: OSD09EP4

    The goal of this proposal is to fabricate a capacitor with an energy density of at least 4 J/cc that is durable over 10,000 cycles with an operational temperature range of -55 °C to 300 °C. This goal requires that a new thermally stable, high dielectric constant material be developed. It is proposed that such a dielectric layer can be achieved using nano-composites. In particular, high dielec ...

    SBIR Phase I 2009 Department of DefenseAir Force
  3. Wide-band Physics-based Radar Sensor Model for Signature Phenomenology Prediction

    SBC: ANALYTIC DESIGNS INC            Topic: AF083151

    The Air Force Research Laboratory (AFRL) desires a method to map Automatic Target Recognition (ATR) performance to signature performance in order to aid database optimization.  To better understand the physical mechanisms relating the sensing platform, candidate ATR algorithms, and the classifier database, advanced radar signal processing models are required.  Analytic Designs, Incorporated (ADI ...

    SBIR Phase I 2009 Department of DefenseAir Force
  4. Modeling of Layer Additive Manufacturing Processes

    SBC: Applied Optimization, Inc            Topic: AF03117

    Applied Optimization, Inc. herein proposes three technical tasks for modeling of electron-beam free-form fabrication [EBF3] as follows. The first task is to enhance existing capability to simulate melt-pool generated by the electron-beam, and evolution of its shape due to interaction between thermo-mechanical and geometry phenomena. The second task is to enhance the existing simulation capability ...

    SBIR Phase II 2009 Department of DefenseAir Force
  5. Conductive, Low-Cost Carbon Prepreg Mat

    SBC: Applied Sciences            Topic: AF083C071

    This Phase I effort will demonstrate the production of large area carbon nanopaper prepreg mats with very high electrical conductivity and EMI shielding capabilities. Currently, metal structures, metallic fillers, and metallic coating are used to provide ESD and EMI shielding, but issues such as weight and corrosion make these materials less than ideal. Carbon nanotubes and nano graphene platele ...

    SBIR Phase I 2009 Department of DefenseAir Force
  6. GaN/AlGaN/AlInN Based THz Focal Plane Array Detectors, Ultraviolet (UV) Lasers, and HEMT High Power RF Devices on Low-Dislocation AlN and GaN Substra

    SBC: TRAYCER DIAGNOSTIC SYSTEMS, INC.            Topic: AF08T006

    In this Phase I effort our team, a collaboration between Traycer Diagnostic Systems and The University of Notre Dame, proposes to develop a single pixel detector of terahertz frequency electromagnetic radiation. The devices we propose are AlN/GaN high electron mobility transistors which, via the excitation of plasma waves in the device channel, exhibit a nonresonant broadband and resonant respons ...

    STTR Phase I 2009 Department of DefenseAir Force
  7. Advanced THz Materials for Nondestructive Evaluation (NDE)

    SBC: TRAYCER DIAGNOSTIC SYSTEMS, INC.            Topic: AF083083

    Stand-off inspection using THz sources is a promising technology for non-destructive evaluation by means of direct imaging as well as by identifying spectroscopic signatures of the material being inspected. This proposal addresses critical developments for realizing this promise. In particular we address the issue of developing THz sources to the point where stand-off detection at ranges of 3-5 ...

    SBIR Phase I 2009 Department of DefenseAir Force
  8. Standardized Hardware Independent Framework for Active Sensing

    SBC: SAMRAKSH COMPANY, THE            Topic: SB082033

    Networks of short-range wireless sensors can yield cost-effective solutions in diverse military and commercial settings, especially where occlusions render long-range sensors operationally ineffective. The current state-of-the-art in application design, however, falls short of realizing cost-effectiveness. We propose to address this problem via an open framework of sensing, high efficiency commu ...

    SBIR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  9. High Power Microwave Frequency Selective Surfaces

    SBC: BerrieHill Research Corporation            Topic: AF083009

    High Power Microwave (HPM) systems penetrate electronic equipment front ends and cause substantial damage to critical components by generating extremely high energy via a very short electromagnetic pulse. Enclosing an HPM radiating aperture with a frequency selective surface (FSS) radome presents a unique problem. The power density seen by HPM radomes is on the order of 10,000 times more than is t ...

    SBIR Phase I 2009 Department of DefenseAir Force
  10. Advanced Technologies for Discrete-Parts Manufacturing

    SBC: BUYCASTING.COM, INC.            Topic: DLA07001

    Under a prior Air Force SBIR program, buyCASTINGS.com and its technology division, FOPAT, developed an innovative material and process to manufacture patterns for the investment casting industry. Defying thousands of years of traditional investment casting practices, FOPAT’s new process utilizes an advanced and proprietary foam material instead of wax. While FOPAT’s product is a direct replace ...

    SBIR Phase II 2009 Department of DefenseDefense Logistics Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government