You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. A Modified GMAW System for Distortion Reduction and Travel Speed Increase through Separate Heat Input and Deposition Rate Control

    SBC: ADAPTIVE INTELLIGENT SYSTEMS            Topic: N07211

    In traditional GMAW and modifications, the current melting the wire is the same as the current heating the base metal. To maintain a minimally acceptable productivity, the base metal heat input is typically much greater than the required to control the distortion at an acceptable or desirable level. In the modified GMAW proposed, a bypass torch is added to an existing GMAW system to bypass part of ...

    SBIR Phase II 2009 Department of DefenseNavy
  2. Novel, Optimal, Physics-Based Reduced Order Models for Nonlinear Aeroelasticity

    SBC: Advanced Dynamics, Inc.            Topic: AF08BT03

    Research is proposed for the development and implementation of state of the art, reduced order nonlinear aeroelastic models for multidisciplinary/multi-fidelity optimization problems. Highly efficient and accurate aeroelastic simulation tools will be constructed based upon the mathematical formalism of optimal prediction theory and a novel implementation of a filtered harmonic balance solution met ...

    STTR Phase I 2009 Department of DefenseAir Force
  3. Physics-Based Identification, Modeling and Risk Management for Aeroelastic Flutter and Limit-Cycle Oscillations (LCO)

    SBC: Advanced Dynamics, Inc.            Topic: A204

    The proposed research program will develop a physics-based identification, modeling and risk management infrastructure for aeroelastic transonic flutter and limit-cycle oscillations (LCO). This capability will be built upon high fidelity state-of-the-art theoretical/computational methods as validated and verified by available experimental data bases, and will include (1) rapid flutter boundary det ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  4. Towards Efficient Viscous Modeling Based on Cartesian Methods for Automated Flow Simulation

    SBC: Advanced Dynamics, Inc.            Topic: A205

    The proposed work aims at developing techniques that will address the current limitations of Cartesian-based Navier-Stokes CFD schemes by exploring three promising methods of implementing improved wall boundary conditions. The three methods are based on: (1) the diamond stencil approach of Delanaye et al., (2) the extrapolation boundary condition work by Marshall and Ruffin, and (3) the Material P ...

    SBIR Phase I 2009 National Aeronautics and Space Administration
  5. VABS Enabled Design Environment for Efficient High-Fidelity Composite Rotor Blade and Wing Section Design

    SBC: Advanced Dynamics, Inc.            Topic: A08022

    This SBIR aims at developing a high-fidelity, yet efficient and easy-to-use, composite rotor blade and wing section design environment to facilitate rapid and confident aeromechanics assessment during conceptual design stages. A well-known technical barrier for composite rotor blade and wing section design is the lack of a user friendly, efficient and high-fidelity design tool to realistically rep ...

    SBIR Phase II 2009 Department of DefenseArmy
  6. Transdermal Delivery of Buprenorphine Prodrugs

    SBC: ALLTRANZ, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): Currently buprenorphine (BUP) is used in the treatment of opioid abuse and for pain management. It can also be used improperly and abused as an opioid. In the United States, buprenorphine is marketed in sublingual and injectable forms. While the drug provides effective treatment, these forms of drug delivery are not desirable because of their peak plasma level ...

    SBIR Phase I 2009 Department of Health and Human ServicesNational Institutes of Health
  7. SBIR PhaseI: Split Amine Absorbent for CO2 Capture from Post Combustion Flue Gas of Coal Fired Power Plants

    SBC: 3 H Company            Topic: BC

    This Small Business Innovation Research Phase I project is to demonstrate an innovative low cost, low energy-consuming, and novel CO2 capture technology based on a process entitled ?Split Amine Absorption?. The Phase I objective is to develop data necessary to confirm the principle of the concept and to identify at least one set of optimum absorbent composition for the CO2 capture from flue gas of ...

    SBIR Phase I 2009 National Science Foundation
  8. Accelerated Learning through Serious Game Technology

    SBC: TIER 1 PERFORMANCE SOLUTIONS LLC            Topic: OSD08CR8

    Military network environments will be subject to both internal and external threats for the foreseeable future. Internal threats to cyber networks from U.S. personnel receive little attention in comparison to external threats; yet, the consequences can be even more devastating. The lack of tools for understanding insider threat, analyzing risk mitigation alternatives, and communicating results e ...

    SBIR Phase I 2009 Department of DefenseAir Force
  9. Multi-layered lightweight alloy development for improved blast and penetration resistance

    SBC: ATI, INC.            Topic: A09AT010

    This program is to develop multi-layered,light weight armor alloys systems that offer improved fragmentation and armor piercing performance as compared to any other monolithic structures. Such alloys and laminated configuration will be developed by utilizing advanced computational techniques to assist in the development of complimentary alloys that would provide an optimal combination of hardness ...

    STTR Phase I 2009 Department of DefenseDefense Advanced Research Projects Agency
  10. Highly Corrosion Resistant Aluminum Alloys: Innovative Processing Methods to Enhanced Corrosion Resistance (e.g., layered structures, etc.)

    SBC: ATI, INC.            Topic: OSD09C03

    Two different approaches will be investigated for producing aluminum alloys with a layer structure that have mechanical properties similar to Al 7050-T7 and Al 7075-T6 and greatly improved corrosion resistance. Layered aluminum alloys will be produced using the Novelis-Fusion™ casting process. This process is very cost effective and has been demonstrate on commercial products. The other appro ...

    SBIR Phase I 2009 Department of DefenseNavy
US Flag An Official Website of the United States Government