List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Novel Extensible Design Approaches for Advanced Aircraft Composite Structural Architectures (MSC P4135)

    SBC: Materials Sciences LLC            Topic: ST13A006

    Among the factors that inhibit the use of composite materials in both general aviation aircraft and DoD platforms are the high cost of engineering and the cost of certification. Unless manufacturers can control risk when introducing new materials and pro

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  2. Novel schemes for highly reliable aerospace electromechanical primary actuation systems

    SBC: LCDRIVES CORP.            Topic: SB132005

    There is a need to achieve 10^-9 reliability for actuators for critical aerospace applications and this precludes single point failure for all but the simplest and most reliable electrical and mechanical components. LC Drives proposes a method of constructing a high reliability linear actuator for critical aerospace applications that is designed such that jams caused by conventional electrical a ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  3. Looking Glass

    SBC: Intific, Inc.            Topic: 004

    Looking Glass is an immersive, story-driven game experience that enables computer science education for students K-12. It presents learning in a game-based series of challenge levels that permit a high degree of player choice in tailoring educational progression and adapting game systems that present both STEM and SEL interactions. Gameplay occurs within a futuristic Wonderland, where proficiency ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  4. Improved Dried Biological Specimen Materials, Recovery and Processing for Diagnostics

    SBC: Connecticut Analytical Corporation            Topic: SB112005

    The dried blood spot (DBS) method is an alternative to venipuncture. The available data indicates that the DBS method is both precise and accurate for a diverse range of compounds. We discovered that proprietary additives vastly improve extraction of proteins in DBS using electrospray. Our unexpected results appear to dramatically increase analyte recovery concentration while reducing DBS prep, an ...

    SBIR Phase II 2013 Department of DefenseDefense Advanced Research Projects Agency
  5. Rapid Thermal Annealing Process with Real-Time Monitoring for SiO2 Layer Formation

    SBC: Advanced Fuel Research, Inc.            Topic: N/A

    Future manufacturing of integrated circuits (IC's), will require analytical instrumentation that can provide on-line process monitoring linked to real time process control. Fourier Transform Infrared (FT-IR) spectroscopy can be effectively utilized to meet this need. As an example, Advanced Fuel Research, Inc. (AFR) has successfully employed simultaneous FT-IR reflection and emission spectroscopy ...

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency
  6. WAVELET BASED METHODS FOR PARTIAL DIFFERENTIAL EQUATIONS

    SBC: Fast Mathematical Algorithms            Topic: N/A

    L PROCESSES OF INTEREST TO DOD.

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency
  7. High Performance Data Compression and Bandwith Measurement

    SBC: Fast Mathematical Algorithms            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseDefense Advanced Research Projects Agency
  8. Jet Vapor Deposition as a High-Rate, Low-Cost Process for Integrated High Tc Superconductors and Ferrite Circulators in

    SBC: Jet Process Corporation            Topic: N/A

    High temperature superconducting (HTS) thin films have important near-term potential for application in multi-chip modules (MCMs). Furthermore, recent developments in magnetic ferrite films for integrated microwave devices offer process compatibility with HTS MCMs. For instance, the incorporation of monolithic ferrite circulators in HTS MCMs will permit sighnificant weight and size savings along ...

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency
  9. Jet Vapor Deposition as a High-Rate, Low-Cost Process for Integrated High Tc Superconductors and Ferrite Circulators in

    SBC: Jet Process Corporation            Topic: N/A

    N/A

    SBIR Phase I 1995 Department of DefenseDefense Advanced Research Projects Agency
  10. Development Of An Ultra Fast Range Sensor

    SBC: K2T, Inc.            Topic: N/A

    Range imaging is the measurement of the three-dimensional shape of an object as an array of 3-D distance values. While range imaging is a critical robotic sensing techonology, existing methods are very slow; the best current devices still produce only a few tens of frames per second. We propose to develop an ultra fast range imaging system consisting of a scanning laser and a sensor array of photo ...

    SBIR Phase II 1995 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government