You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Novel Extensible Design Approaches for Advanced Aircraft Composite Structural Architectures (MSC P4135)

    SBC: MATERIALS SCIENCES LLC            Topic: ST13A006

    Among the factors that inhibit the use of composite materials in both general aviation aircraft and DoD platforms are the high cost of engineering and the cost of certification. Unless manufacturers can control risk when introducing new materials and pro

    STTR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  2. An Advanced NDE Approach to Determine the Adhesive Bond Strength

    SBC: RESODYN CORPORATION            Topic: SB123001

    Bonded composite materials offer considerable opportunity to reduce manufacturing cost, improve structural performance, and improve fuel efficiency of aircraft. However, bonded composite aircraft structures continue to be a challenge to manufacture due to the certification requirement to determine the strength of the bonds in the structures - before they are placed into service. Current testing te ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  3. Novel schemes for highly reliable aerospace electromechanical primary actuation systems

    SBC: LCDRIVES CORP.            Topic: SB132005

    There is a need to achieve 10^-9 reliability for actuators for critical aerospace applications and this precludes single point failure for all but the simplest and most reliable electrical and mechanical components. LC Drives proposes a method of constructing a high reliability linear actuator for critical aerospace applications that is designed such that jams caused by conventional electrical a ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  4. Looking Glass

    SBC: Intific, Inc.            Topic: 004

    Looking Glass is an immersive, story-driven game experience that enables computer science education for students K-12. It presents learning in a game-based series of challenge levels that permit a high degree of player choice in tailoring educational progression and adapting game systems that present both STEM and SEL interactions. Gameplay occurs within a futuristic Wonderland, where proficiency ...

    SBIR Phase I 2013 Department of DefenseDefense Advanced Research Projects Agency
  5. NANOSTRUCTURED THERMAL BARRIER COATING BASED ON FILTERED ARC PLASMA SOURCE ION DEPOSITION

    SBC: ARCOMAC SURFACE ENGINEERING, LLC            Topic: SB062003

    In an attempt to extend turbine engine on-wing time, thermal barrier coatings (TBC) using various application techniques have been developed. High temperatures corrosion due to penetration of chemically active species along the columnar grains of the topcoat limits the durability of TBCs. This results in degradation of the topcoat thermal insulation ceramic layer and accelerated oxidation of the b ...

    SBIR Phase I 2006 Department of DefenseDefense Advanced Research Projects Agency
  6. Fundamental Interactions Generating Heterogeneous Teams including Robots (FIGHT-R)

    SBC: CHI SYSTEMS INC            Topic: SB062009

    Fully autonomous, taskable robots for use in unconstrained environments are still a dream rather than a reality because of a host of problems, including capabilities of existing sensors, effectors, and control/planning software. Indeed, concepts of operations for robot use require that robots collaborate directly with humans, in relationships similar to bomb squad dogs. Fortunately, enough progres ...

    SBIR Phase I 2006 Department of DefenseDefense Advanced Research Projects Agency
  7. Silicon-Based Infrared Imaging Sensor

    SBC: IRIMSENS, LLC            Topic: SB062015

    A Phase I effort to investigate the use of poly-crystalline Ge-on-Si and strained SiGe alloy grown on silicon for near-infrared photodetectors is proposed. These devices are expected to cover the spectral band that stretches from a wavelength of 0.8 to 1.6 microns. If reasonable performance devices can be fabricated, this will potentially pave the way for the integration of signal processing e ...

    SBIR Phase I 2006 Department of DefenseDefense Advanced Research Projects Agency
  8. Metalorganic Enhanced Ion Milling for BaSrTio3

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    The demand for higher performance semiconductor devices is pushing the limits of current materials technology. The development of a high dieletric constant capacitor material with 10 - 100 times the charge storage of SiO2 would allow a flat capacitor cell to be used in 256 Mb DRAMs, and simple stacked capacitors to be adopted for 1 and 4 Gb generations. IBM, TI and Micron have entered into an ARPA ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  9. Cost Effective Copper CVD Precursors for ULSI Devices

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Chemical vapor deposition (CVD) of copper for vias and interconnects is critical to manufacture of next generation high speed ULSI devices and has been extensively investigated over the last few years. Although considerable progress has been made commercialization of this technology is currently impossible due to the high cost of the source reagents. In this Phase I program Advanced Technology Mat ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  10. Isolation Techniques for High Temperature Integrated Sensor/Electronics Applications

    SBC: Advanced Technologies/Laboratories Intl            Topic: N/A

    Sensors and electronics will become increasingly pervassive as weight, fuel efficiency, cost and emissions requirements put increasing demands on vehicle technology. The development of high temperture, integrated sensors and electronics is necessary to cost-effectively address both civilian and military needs. The arrival of single crystal silicon carbide substrates and high quality epitaxial laye ...

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government