List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Integrated Component and System Analyses of Instabilities in Test Stands

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: T1001

    Instabilities associated with the operation of liquid rocket propulsion systems and test facilities usually manifest themselves as structural vibrations and may cause structural damage. While the source of the instability is directly related to the performance of a component such as a turbopump, the associated pressure fluctuations as they propagate through the system have the potential to amplify ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  2. High Capacity and High Voltage Composite Oxide Cathode for Li-ion Batteries

    SBC: NEI CORPORATION            Topic: T301

    Currently used cathode materials in energy storage devices do not fully satisfy the power density and energy density requirements for NASA's exploration missions. Working in collaboration with our STTR partner at University of California – San Diego, we propose to develop layered-layered composite cathode materials that offer superior performance over commercially available positive electrode mat ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  3. Reliable Autonomous Surface Mobility (RASM) in Support of Human Exploration

    SBC: PROTOINNOVATIONS, LLC            Topic: T102

    ProtoInnovations, LLC and Carnegie Mellon University have formed a partnership to commercially develop rover-autonomy technologies into Reliable Autonomous Surface Mobility (RASM). Our aim is to provide safe and reliable means for lunar rovers to travel at substantial speeds and operate in proximity to astronauts and other vehicles. Our unique partnership brings together state-of-art technologie ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  4. Hybrid Integrated Photonics for Ultrahigh Throughput Optical Signal Processing

    SBC: STRUCTURED MATERIALS INDUSTRIES, INC.            Topic: T401

    Structured Materials Industries, Inc. and Cornell University propose to develop high speed integrated photonic switches and WDM for LIDAR applications. The team has recently shown that single mode silicon nitride (Si3N4) waveguides to have very low propagation losses. This material is an ideal candidate for the propagation and manipulation of optical signals at LIDAR wavelengths (1.06 μm). It is ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  5. Hydrogen Recovery System

    SBC: Skyre, Inc.            Topic: T1001

    Liquid hydrogen is used extensively by NASA to support cryogenic rocket testing. In addition, there are many commercial applications in which delivery and use of cryogenic hydrogen is more economical than gaseous hydrogen. Unfortunately, loss of hydrogen resulting from boiloff can both increase the cost of the end product and create safety concerns. Sustainable Innovations and its teammates, Th ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  6. Scalable Gravity Offload System

    SBC: Astrobotic Technology, Inc.            Topic: T602

    The proposed innovation is a scalable gravity off-load system that enables controlled integrated testing of Surface System elements such as rovers, habitats, and space suits in planet-relevant gravity which addresses T6.02 in the direct solicitation of a gravity off-load system. Phase I delivers a nominal design in the form of a final report, Phase II builds this design and delivers hardware, and ...

    STTR Phase I 2010 National Aeronautics and Space Administration
  7. An Automated High Aspect Ratio Mesher for Computational Fluid Dynamics

    SBC: Ciespace Corporation            Topic: T801

    Computational fluid dynamics (CFD) simulations are routinely used while designing, analyzing, and optimizing air- and spacecraft. An important component of CFD simulations is mesh generation, or discretization into polygonal or polyhedral cells, of the domain being analyzed. The overall computational cost and accuracy of simulations depend heavily on mesh quality – the size, shape, and structur ...

    STTR Phase I 2010 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government