You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Design, Manufacture, and Test of an Underwater Acoustic Intensity Probe

    SBC: Acoustech Corporation            Topic: N/A

    The Acoustech Corporation as the prime contractor and the Pennsylvania State University - Applied Research Labc-atory as the subcontractor propose to design, manufacture, and test an underwater acoustic intensity probe containing a geophone and two-hydrophones encased in a neutrally buoyant package. The results of this proposed effort are anticipated to be highly successful since the researc ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  2. Light Weight High Voltage Power System

    SBC: 3tech Corp            Topic: N/A

    3Tech proposes in the phase I effort to provide a detailed feasibility report analyzing the existing high voltage DC power supplies in the communications aircraft for weight reduction possibilities. In addition, 3Tech proposes a novel multiphase High Voltage Power Converter to Navy to power the Radio Frequency Power Amplifiers in the aircraft. The power converter is based on modern high frequen ...

    SBIR Phase I 1996 Department of DefenseNavy
  3. Explosibility Of Magnesium Coated Boron Particles In Air

    SBC: Aerochem Research            Topic: N/A

    The maximum explesion pressure rate of pressure rise and oxidant consumption Will be determined for air-suspended clouds ef a unique fine ¿less than l0 micrometer diameter¿ boron powder Yhe unique powder particles are thinly coated ¿by a process developed at AeroChem7 with magnesium or aluminum to aid in their ignitionThe proposed method is based on extensive work at the U S Bureau of Mines mea ...

    SBIR Phase II 1996 Department of DefenseNavy
  4. SOFTWARE AID FOR DIAGNOSIS OF WRIST JOINT PATHOLOGY

    SBC: Amniotech, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  5. Three-Dimensional Electromagnetic Modeling and Simulation of MMICs and Interconnects in Microwave Packages

    SBC: ANSOFT CORP.            Topic: N/A

    A methodology is proposed for introducing the capability of modeling active MMICs into the industry-standard three dimensional electromagnetic field simulator High Frequency Structure Simulator (HFSS) and Maxwell SI Eminence. The first objective of the proposed work is to evaluate the existing capabilities of HFSS/Eminence for characterizing the passive three dimensional interconnect problems as ...

    SBIR Phase II 1996 Department of DefenseAir Force
  6. Focused Application Software for Design of Ferrite Patch Antennas

    SBC: ANSOFT CORP.            Topic: N/A

    Currently, most antenna array designs are mechanically steered. However, as demand for higher performance antennas increases, an electronic replacement for the mechanical system becomes necessary. An alternative that may prove to be more cost effective is to use ferrite patch antennas as the elements in the array. The antenna's radiation characteristics are controlled by the direction and magni ...

    SBIR Phase I 1996 Department of DefenseAir Force
  7. An Autonomous Self-Propelled System for Hard Rock Drilling

    SBC: Aps Technology, Inc.            Topic: N/A

    40457 APS Technology Several advancements are needed to improve the efficiency and accuracy of hard rock drilling. Of particular interest are bottomhole assemblies (BHAs) which can grip the borehole wall in order to provide a platform from which torque and compressive force can be applied to the bit and the direction of drilling can be continuously monitored and controlled. This project will d ...

    SBIR Phase I 1996 Department of Energy
  8. Motor Vehical Crash Costing Technology

    SBC: ARCCA, INC.            Topic: N/A

    With the advent of widely available PC technology, crash safety information can be cost-effectively disseminated to millions of people in an engaging and educational way. With an enticing and informative PC application, data about damages, costs, injuries and death can be personalized and grasped by anyone, particularily young drivers developing new driving behaviors. ARCCA's proposed system wil ...

    SBIR Phase I 1996 Department of Transportation
  9. Direct Printing of Conductive Patterns Using Activated Nanosize Metal Development of Novel Toners for Direct Printing of Conducting Patterns

    SBC: ARGONIDE CORPORATION, THE            Topic: N/A

    Unusually active nanosize metal powders have been in development and production in Russia since 1975, and they are now being manufactured in the United States. Their size, approximately 50 to 100 nanometers, provides promise for sub-micron size features. The powders have significant stored energy so that they can exotherm well below melting with enough energy to cause them to melt. They are usua ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. An Investigation of Feasibility of Adapting the Arlyn Arm Workstation for the Educational Use of People with Disabilities

    SBC: Arlyn Toolworks            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Education
US Flag An Official Website of the United States Government