List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. FEASIBILITY OF ADJUSTABLE SINK/COUNTER SYSTEMS

    SBC: Accessible Designs/Adjustable            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of Agriculture
  2. A MODEL FOR PREDICTING MMC RESPONSE UNDER MULTIAXIAL LOADING

    SBC: ADTECH SYSTEMS RESEARCH INC            Topic: N/A

    This proposal addresses the immediate need for models for accurate description of metal matrix composite (MMC) response to multiaxial loadings such as those existing in most turbine engine components. The model is needed for both design and life prediction of engine components. The proposed effort will result in a cost-effective method of predicting MMC response under multiaxial loading which will ...

    SBIR Phase II 1994 Department of DefenseAir Force
  3. Improved Barrier Coatings for Continuous Silicon-Carbide Fibers in Ceramic Composites

    SBC: Advanced Ceramics Corp.            Topic: N/A

    N/A

    SBIR Phase I 1994 National Aeronautics and Space Administration
  4. Micromachined Silicon Temperature Extreme Sensor Requiring No Power Source

    SBC: ADVANCED MICROMACHINES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseDefense Advanced Research Projects Agency
  5. Microfabricated Silicon Carbide Heat Flux Sensor

    SBC: ADVANCED MICROMACHINES, INC.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  6. Advanced and Affordable Aircraft Engine Fire Protection Concepts

    SBC: Afp Associates            Topic: N/A

    The banning of Haon fire extinguishing agents has seriously compromised the effectiveness of fire protection for a number of aircraft applications. Efforts during the last five years have thus far identified alternative agents that have significantly reduced effectiveness (average +75% weight penalty), highter cost and ill-defined toxicologic properties. This Phase I program offers an affordable, ...

    SBIR Phase I 1994 Department of DefenseAir Force
  7. Physically Active Fire Extinguishing Materials as Replacements for Halon Agents in Aircraft Systems

    SBC: Afp Associates            Topic: N/A

    The banning of Halon fire extinguishing agents has seriously compromised the effectiveness of fire protection for a number of applications where they have been the 'universal' choice, especially on-board aircraft in habitable areas and 'fire zone' areas. Efforts have been underway by the chemical industry and various government agencies for the development of suitable alternative 'chemically' acti ...

    SBIR Phase I 1994 Department of DefenseAir Force
  8. Process Optimization Through Discovery and Integration of Materials and Processing Properties

    SBC: Ai Ware, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1994 Department of DefenseAir Force
  9. Attenuation of Aircraft Wing Tip Vortices Using the Haney Swirler

    SBC: ANALEX CORP.            Topic: N/A

    The proposed innovation would do for the tip vortex what the turning vanes do at the inlet to gas turbine combustors, namely reduce the swirl. The intent of this proposal is to study the feasibility of the haney Swirler which consists of a set of vanes at the trailing edge of a downward curved tip, specifically a Sargent type tip. The standard wing tip would be modified to turn the outward flow do ...

    SBIR Phase I 1994 Department of DefenseAir Force
  10. PROCESSING FOR BURIED METALLIZATION IN DIAMOND FILM

    SBC: Applied Sciences            Topic: N/A

    Due to the lack of techniques for buried metallization in PD or multilayer metallized PD, diamond has not been used as a material for electronic packaging. The primary obstacle in buried metallization in PD or producing multilayer metallized PD is the difficulty in generating good bonding between PD and selected metals, especially copper. It is proposed to develop the requisite technology using a ...

    SBIR Phase I 1994 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government