List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. AN ACOUSTIC PLATE MODE DNA BIOSENSOR

    SBC: BIODE, INC.            Topic: N/A

    THIS PROJECT IS DEVELOPING A NEW SOLID-STATE BIOSENSOR TECHNOLOGY FOR BIOLOGICAL MEASUREMENTS. THIS TECHNOLOGY IS BASED ON THE MERGING OF TWO RELATIVELY DIFFERENT TECHNOLOGIES: NUCLEIC ACID PROBES (DNA HYBRIDIZATION TECHNOLOGY) WITH ACOUSTIC PLATE MODE (APM) MICROSENSORS. RECENT ADVANCES IN THE DESIGN AND OPERATION OF APM DEVICES HAVE DEMONSTRATED A DNA HYBRIDIZATION SENSOR PRINCIPLE WITH EXCELLEN ...

    SBIR Phase I 1992 Department of Energy
  2. COLD STERILANT FOR FIELD MEDICAL USE

    SBC: Chemical Research Lab Of            Topic: N/A

    EARLIER WORK HAD SHOWN THAT THERE EXISTS A SYNERGISTIC EFFECT BETWEEN QUATERNARY AMMONIUM COMPOUNDS AND CHLORINE DIOXIDE (US PATENT 4,073,888 TO PETTIBONE LABORATORIES, A SUBSIDIARY OF INTERNATIONAL DIOXCIDE, INC.) THIS COMPOSITION IS A SOLUTION WHICH RECENTLY WAS SHOWN TO PASS THE SUTURE LOOP TEST (AOAC SPOROCIDAL OFFICIAL METHOD) IN 6-9 HOURS INDICATING THE COMPOSITION TO BE SPOROCIDAL AND A COL ...

    SBIR Phase I 1992 Department of DefenseArmy
  3. RECOVERY OF METALS FROM AQUEOUS WASTE STREAMS VIA ELECTROLYTIC RECOVERY UTILIZING A FLUIDIZED POWDER CATHODE

    SBC: Covofinish Co., Inc.            Topic: N/A

    A NEW SYSTEM FOR THE ELECTROLYTIC RECOVERY OF METALS FROM AQUEOUS SOLUTIONS WITH A UNIQUE ELECTRODE CONFIGURATION IS PROPOSED. THIS SYSTEM WOULD USE A CATHODE CONSISTING OF A LIQUID FLUIDIZED BED OF METAL POWDER, CARBON POWDER, OR METALLIZED PLASTIC BALLS. THE CATHODE SHOULD PROVIDE A SIGNIFICANTLY LARGER SURFACE AREA THAN A STANDARD SOLID CATHODE AND CONSEQUENTLY WILL INCREASE THE EFFICIENCY OF T ...

    SBIR Phase I 1992 Environmental Protection Agency
  4. COMPOSITE MATERIALS GUIDANCE FOR SUBMARINE

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    COMPOSITE MATERIALS OFFER A WIDE RANGE OF ATTRIBUTED THAT CAN IMPROVE THE PERFORMANCE AND REDUCE THE COST OF NEW SUBMARINES. COMPOSITES HAVE NOT YET BEEN USED EXTENSIVELY IN SUBMARINES BECAUSE THERE IS LITTLE EXPERIENCE IN THE SUBMARINE ENGINEERING COMMUNITY ON WHICH TO BASE COMPONENT DESIGN. COMPOSITES, UNLIKE METALS, HAVE A VERY LIMITED BODY OF DESIGN GUIDANCE SPECIFICALLY ORIENTED TO SUBMARINE ...

    SBIR Phase II 1992 Department of DefenseNavy
  5. Format D Battery Module

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    1Reliable and continuous power to submarine electronics is essential for mission execution and for the safe operation of the ship. Digital electronics cannot continue operation through even very short power outages cause by bus transfer devices that have historically been sufficient for analog combat systems. The restart and reload that a digital system must execute after a short power interruptio ...

    SBIR Phase I 1992 Department of DefenseNavy
  6. SOOT ION QUANTIFICATION SYSTEMS

    SBC: DEEGAN RESEARCH GROUP, INC.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseAir Force
  7. Erbium-Doped Fiber Amplifiers at 1550 nm Pumped with 800 nm Laser Diodes

    SBC: Edfa Consultants            Topic: N/A

    We are developing erbium doped fiber amplifiers (EDFAs) for optical communication systems, local area networks, fiber sensors and optical measuring instruments. The EDFA is a new and revolutionary technology that is having a profound effect on the design of lightwave system architectures and other applications. Never has a technology blossomed as fast as the EDFA: it went from a twinkle in the eye ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  8. High-Strength Piezoceramic Fibers for Smart Adaptive Structures

    SBC: Fiber Materials, Inc.            Topic: N/A

    This program on high-strength piezocermaic fibers probes a critical gap in the technology of smart materials which interconvert electrical and mechanical energy. Strong piezoceramic fibers that can function as load bearing members in structures and survive the large mechanical strains encountered in highly stressed engineering components are not developed. It is envisioned that piezoelectric fabri ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  9. Truss Member Fabrication Using In-Situ Thermoplastic Materials

    SBC: Fiber Materials, Inc.            Topic: N/A

    To continue the development of low cost carbon composite material, this program is intended to demonstrate the ability to fabricate net shape tubular space truss components using co-braided carbon and thermoplastic (PEEK) yarns. The thermoplastic yarn, when processed through an autoclave cure using high pressure and temperature, will fuse the high modulus carbon fibers together to form a rigid fin ...

    SBIR Phase I 1992 Department of DefenseMissile Defense Agency
  10. 2400K GAS SAMPLE CELL

    SBC: Fiber Materials, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1992 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government