You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Development of Digital Receiver/Exciters for Missile Defense Radars

    SBC: Applied Radar, Inc.            Topic: MDA06032

    This proposal will address the development of a digital receiver and exciter (DREX) technology for next-generation scalable missile-defense radar. A DREX is currently being specified at the sub-array level to feed an analog tile or panel subarray. This al

    SBIR Phase II 2009 Department of DefenseMissile Defense Agency
  2. Coherent Distributed Aperture Enabled Active Electronically Steered Array (CDA-AESA)

    SBC: Applied Radar, Inc.            Topic: MDA07T011

    Missile threats faced by our country are constantly increasing in lethality. The weapon used to counter such missiles is the kinetic interceptor. To work effectively, the reentry vehicle (RV) location must be precisely known. Confusing objects within the reentry complex make the key discrimination process very difficult. Coherent distributed aperture (CDA) radar represents an important advance in ...

    STTR Phase II 2009 Department of DefenseMissile Defense Agency
  3. Advanced Multi-Layer Phased-Array Interconnect Technology

    SBC: Applied Radar, Inc.            Topic: MDA07036

    The design and development of scalable panel-based phased-array radars requires the high density integration of solid-state components and adequate thermal mitigation within the array lattice constraints. The current integration technologies such as system-on-a-chip (SOC), multi-chip-module-deposition (MCM-D), and system-on-package (SOP), will help miniaturizing sub-modules for various functional ...

    SBIR Phase II 2009 Department of DefenseMissile Defense Agency
  4. Wideband Sub-Array Digital Receiver Exciter (DREX) Development and Packaging

    SBC: Applied Radar, Inc.            Topic: MDA08028

    This proposal will address the development of a wideband digital receiver and exciter (DREX) technology for next-generation scalable missile-defense radar. A DREX is currently being specified at the sub-array level to feed an analog tile or panel subarray in order to generate flexible waveforms and beams with improved performance. The technical challenge is to meet the required receiver sensitivit ...

    SBIR Phase I 2009 Department of DefenseMissile Defense Agency
  5. Adaptive Distributed Aperture Radar Mainlobe Jammer Suppression

    SBC: Applied Radar, Inc.            Topic: MDA07037

    Current monostatic radar systems suffer fine tracking and discrimination performance degradation when encountering mainlobe jammers deployed within a reentry complex. As a result our forces may be vulnerable to attack. During Phase I, we have developed di

    SBIR Phase II 2009 Department of DefenseMissile Defense Agency
  6. User Toolkit for Reducing Cost and Time in the Design of SONAR Systems Using Relaxor Piezoelectric Single Crystals

    SBC: Btech Acoustics, LLC            Topic: N08063

    BTech Acoustics proposes the development of a detailed Cylindrical Transducers User Toolkit for the design of underwater acoustic transducers and sonar systems employing cylindrical transducers and relaxor piezoelectric single crystals. The Cylindrical Transducer User Toolkit (CT-Toolkit) will allow a detailed, accurate and user-friendly method to provide the acoustic performance for cylindrical t ...

    SBIR Phase II 2009 Department of Defense
  7. Alternative Aggregate Combat Modeling Algorithms

    SBC: Gnosys, Inc.            Topic: ST071003

    Gnosys, the University of Alabama in Huntsville, and SAIC propose that entity level performance data be “rolled-up” into aggregate performance data and used to resolve unit level combat at the unit level. Such an approach for conducting aggregate simulation would realize the advantage of employing validated entity level data but also keep the advantages inherent in aggregate simulation of com ...

    STTR Phase II 2009 Department of DefenseDefense Advanced Research Projects Agency
  8. High Power, High Repetition Rate, Pulsed, Blue Laser for ASW Purposes

    SBC: HOPE TECHNOLOGIES, INC.            Topic: N07114

    A yb laser at 976 nm is a three level system. By placing Sm in the core (to reduce stimulated emission above 1,000 nm) and Yb in a surrounding ring, a more efficient laser at 976 nm can be obtained. This will be Q-switched to serve as the first stage of a pulse source in a MOPA configuration. The second stage will be a HOM fiber designed to amplify the pulses from the first stage. With a HOM fiber ...

    SBIR Phase II 2009 Department of DefenseNavy
  9. Imaging Instrumentation System

    SBC: DBV TECHNOLOGY, LLC            Topic: N08199

    DBV Technology, LLC proposes to develop an acoustic instrumentation system for the Test & Evaluation of Trident D-5 munitions to support the geo-location of near simultaneous impacts on the sea surface of up to 500 projectiles within a 500 meter radius area to an accuracy less than 1 meter CEP referenced to WGS-84. The proposed system will leverage over ten years of DBV Technology experience in ba ...

    SBIR Phase I 2009 Department of DefenseNavy
  10. Application Additions to the Long Range Ball Bar for Multi-axis Machine Capability Analysis

    SBC: IQL Independent Quality Labs, Inc.            Topic: DLA08001

    Testing of machine tools has been evolving for nearly 100 years. The advent of low cost computer data analysis, control and communication has allowed the design, manufacture and inspection of complex contoured surfaces. The need to ever decrease the tolerances has led to the development of machine tools which can no longer be tested with these old methods. These machines must be evaluated within ...

    SBIR Phase I 2009 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government