You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Improved Manufacturing Technologies for Polymer Matrix Composite Engine Components

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: AF06115

    This proposal addresses the development and use of lightweight, low thermal-capacity reformable tooling materials for high-temperature composite processing evaluation, parts prototyping, trial production and full-rate production of PMC engine components. The weight-saving promise of high-temperature polymer matrix composites (PMCs) for engine components is offset by the very high costs of parts ma ...

    SBIR Phase II 2008 Department of DefenseAir Force
  2. STTR Phase I: Optimized Nano-Porous Surfaces for Boiling Heat Transfer

    SBC: ADVANCED MATERIALS & DEVICES            Topic: AM

    The Small Business Technology Transfer Research (STTR) Phase I project aims at developing a heat exchanger technology utilizing a homogeneous nano-porous surface (NPS) that will significantly increase the efficiency of the boiling process. The NPS technology offers considerable enhancement in boiling heat transfer capabilities for small- to large-size heat generating facilities, power plants, and ...

    STTR Phase I 2008 National Science Foundation
  3. STTR Phase II: Low-Cost Nanoparticles for Enhanced Heat Transfer

    SBC: ADVANCED MATERIALS & DEVICES            Topic: CT

    This STTR Phase II project is to develop and commercialize copper nanofluids for heat transfer enhancement applications. The low cost nanoparticle production methods developed will produce quality nanoparticles for this application. Success of this STTR project will benefit a wide range of applications for heat transfer enhancement including: electronics, HVAC, transportation, textile and paper m ...

    STTR Phase II 2008 National Science Foundation
  4. STTR Phase I:Printable flexible TiO2 photoanodes for solar energy conversion and hydrogen generation

    SBC: ALTAIRNANO, INC.            Topic: AM

    The Small Business Technology Transfer Research (STTR) Phase I project focuses on the production of a flexible, low cost, solar cell which can be used for the conversion of solar radiation to electricity or hydrogen. The proposed work will involve working on increasing the efficiency of the dye sensitized solar cell by increasing the connectivity of the anatase network in a low temperature scalab ...

    STTR Phase I 2008 National Science Foundation
  5. Head orientation sensing system

    SBC: APPAREO SYSTEMS LLC            Topic: AF071020

    Appareo Systems, LLC, proposes to develop a functional prototype head-mounted position and orientation system (HPOS). The HPOS will be capable of operating in electromagnetic fields of up to 200 volts/meter and will provide at least one degree of accuracy and at least one degree of resolution at a 60 Hz update rate while providing 3 degree of freedom (DOF) information on head orientation, includi ...

    SBIR Phase II 2008 Department of DefenseAir Force
  6. Adaptive Distributed Aperture Radar Mainlobe Jammer Suppression

    SBC: Applied Radar, Inc.            Topic: MDA07037

    The mitigation of mainlobe jamming is essential to missile defense radar performance. Applied Radar is currently investigating distributed aperture and adaptive processing architectures that promise a new generation of advanced radar performance. Our proposed program will research the application of these distributed aperture radar techniques to determine the mainlobe jammer suppression possible w ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  7. Advanced Phased-Array Module Interconnect Technology

    SBC: Applied Radar, Inc.            Topic: MDA07036

    The design and development of phased-array radars requires the integration of solid-state components and adequate thermal mitigation within the array lattice constraints. The current trend is towards increasingly planar designs and a reduction in the array depth. The MDA SPEAR program is one example in which a planar T/R “tile” architecture is utilized. System-on-a-chip technologies such as Si ...

    SBIR Phase I 2008 Department of DefenseMissile Defense Agency
  8. ElectronicTextile Antennas

    SBC: Applied Radar, Inc.            Topic: SB021014

    Long-duration wide-area surveillance missions increasingly are space-based. MEO orbits offer space-based radar systems more time on station, but require very large array apertures on the order of 100m in diameter. Achieving larger apertures with smaller, lighter launch packages and stable on-orbit pointing is a challenge that E-Textiles promises to meet. Textile processes can be used to achieve a ...

    SBIR Phase II 2008 Department of DefenseArmy
  9. Engineered Spores as Fluorogenic Biological Indicators for Sterility Testing

    SBC: BCR DIAGNOSTICS, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): BCR Diagnostics, Inc. (BCR) has recently developed and patented a technology platform for engineering fluorogenic functionality into living Bacillus spores. Fluorogenic spores (F-spores) produced at BCR appear to be phy siologically identical to normal spores except for performing as self reporters of initial germination events. Considering the unique features ...

    SBIR Phase II 2008 Department of Health and Human ServicesNational Institutes of Health
  10. A Standardized Assessment Process Supporting Health, Environmental and Economic Benefits of Outdoor Recreation Facilities to Rural Americans

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    Currently, there is no standardized process for assessing the accessibility of recreation elements used for outdoor recreation, picnic and camping facilities although standards for specific outdoor recreation elements exist, the Forest Service Outdoor Recreation Accessibility Guidelines and the draft US Access Board Regulatory Negotiation Committee on Accessibility Guidelines for Outdoor Developed ...

    SBIR Phase I 2008 Department of Agriculture
US Flag An Official Website of the United States Government