Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Integrated, self-actuated, blood collection and biomarker purification device

    SBC: Tasso, Inc            Topic: SB122003

    Blood-based point-of-care (POC) diagnostics or remote diagnostics that require specialized equipment only available in centralized, commercial laboratories are currently limited by major logistical and technical barriers. Blood collection can be a traumatic, inconvenient, and inconsistent process that is based on decades-old technologies, such as the lancet-puncture, that are not amenable to new P ...

    SBIR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency
  2. New Non-Carbonate Organosilicon Enhanced Safety High Temperature Electrolyte

    SBC: Silatronix            Topic: 07a

    A major factor impacting development of Liion batteries for vehicles is the effect of elevated temperature ( & gt;50C) on battery life. Calendar and cycle life degrade at elevated temperatures due to degradation processes involving the interaction of the salt, solvents, and electrodes. Safety is undermined by use of high vapor pressure and low flash point volatile carbonate solvents. Ov ...

    SBIR Phase I 2014 Department of Energy
  3. Low-Cost, High Efficiency Integration of Solid-State Lighting and Building Controls Using a Packet Energy Transfer (PET) Power Distribution System

    SBC: VoltServer            Topic: 03a

    Solid state lighting has not yet taken off in commercial buildings due to its high relative installed cost. On a normalized basis, solid state lighting replacement lamps are on the order of two times more expensive than equivalent compact fluorescent lamps (CFLs), and five times more expensive than an equivalent downlight fixture. An additional barrier relates to the performance and cost of the dr ...

    SBIR Phase I 2014 Department of Energy
  4. High Reliability, Long Lifetime H-Ion Source

    SBC: Phoenix LLC            Topic: 32e

    Existing high current negative ion sources have unacceptably short lifetimes. In this Phase II project, a long lifetime, high reliability H- ion source capable of delivering current greater than 10 mA will be constructed, built, and tested. Feasibility was proven and preliminary designs were completed during Phase I. The immediate DoE need for this technology is a H- ion source to serve as an i ...

    SBIR Phase II 2014 Department of Energy
  5. Development Of Ultra-Low Noise, Wide Bandwidth, High Gain Transimpedance Amplifiers For Experimental And Commercial Detection Systems

    SBC: XANTHO TECHNOLOGIES, LLC            Topic: 28a

    Many detectors - including solid-state particle detectors, microchannel plates, and photodiodes - output small current signals that require amplification and conversion to a voltage. Transimpedance amplifiers (TIA) are widely utilized in experimental and commercial applications for this task. Numerous detection systems require wide bandwidth, ultra-low noise, high gain, and linear amplification. C ...

    SBIR Phase II 2014 Department of Energy
  6. Development of an In Situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: TopicH

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  7. Development of an in situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: 09NCERP1

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  8. Innovative Approaches to Low Power, Sub-Threshold Electronic Circuits

    SBC: CAMGIAN MICROSYSTEMS CORP            Topic: SB082045

    This program proposes to demonstrate an ultra-low power design methodology and circuits for digital logic employing advanced dynamic voltage scaling (DVS) for asynchronous NULL Convention Logic (NCL) circuits operating in sub-threshold to super-threshold voltage regimes. The power supply voltages of logic block partitions will be independently set by on-chip voltage controllers based on the data p ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  9. Nanometer-Precision Positioning System with 2mm x 2mm Range of Motion

    SBC: PIEZOMAX TECHNOLOGIES, INC.            Topic: BMDO99013

    nPoint proposes to design and construct a closed-loop 2mm range-of-motion, 2-axis nano-positioning system with unprecedented precision and resolution. There is considerable need for such a tool in near-future nanomanufacturing, characterization, and lithography. One example is scanned-probe tip-based nanomanufacturing. As such manufacturing comes to commercial fruition, accurate long-range positi ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  10. Functionally Graded Metallic Lattice Components (FGMLC) for Advanced Propulsion Component

    SBC: Orbital Technologies Corporation            Topic: SB082007

    ORBITEC proposes to develop functionally graded metallic lattice components for use in advanced rocket propulsion systems. The FGMLC material will utilize an internal intertwined lattice structure to join different constituents of the composite material. This lattice structure will allow a designed gradation from one material to another while maintaining each materials properties. The FGMLC will u ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government