Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Integrated, self-actuated, blood collection and biomarker purification device

    SBC: Tasso, Inc            Topic: SB122003

    Blood-based point-of-care (POC) diagnostics or remote diagnostics that require specialized equipment only available in centralized, commercial laboratories are currently limited by major logistical and technical barriers. Blood collection can be a traumatic, inconvenient, and inconsistent process that is based on decades-old technologies, such as the lancet-puncture, that are not amenable to new P ...

    SBIR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency
  2. Quantum Dot Mid-Wave Infrared Focal Plane Array

    SBC: Nanolight, Inc.            Topic: ST13B002

    The objective of this proposal is to develop novel lead salt semiconductor quantum dot (QD) mid-infrared detectors for sensing and imaging applications. The proposed development is based on our recent study of PbSe photoconductive (PC) detector with a rec

    STTR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  3. Development of an In Situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: TopicH

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  4. Development of an in situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: 09NCERP1

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  5. Innovative Approaches to Low Power, Sub-Threshold Electronic Circuits

    SBC: CAMGIAN MICROSYSTEMS CORP            Topic: SB082045

    This program proposes to demonstrate an ultra-low power design methodology and circuits for digital logic employing advanced dynamic voltage scaling (DVS) for asynchronous NULL Convention Logic (NCL) circuits operating in sub-threshold to super-threshold voltage regimes. The power supply voltages of logic block partitions will be independently set by on-chip voltage controllers based on the data p ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  6. Nanometer-Precision Positioning System with 2mm x 2mm Range of Motion

    SBC: PIEZOMAX TECHNOLOGIES, INC.            Topic: BMDO99013

    nPoint proposes to design and construct a closed-loop 2mm range-of-motion, 2-axis nano-positioning system with unprecedented precision and resolution. There is considerable need for such a tool in near-future nanomanufacturing, characterization, and lithography. One example is scanned-probe tip-based nanomanufacturing. As such manufacturing comes to commercial fruition, accurate long-range positi ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  7. Functionally Graded Metallic Lattice Components (FGMLC) for Advanced Propulsion Component

    SBC: Orbital Technologies Corporation            Topic: SB082007

    ORBITEC proposes to develop functionally graded metallic lattice components for use in advanced rocket propulsion systems. The FGMLC material will utilize an internal intertwined lattice structure to join different constituents of the composite material. This lattice structure will allow a designed gradation from one material to another while maintaining each materials properties. The FGMLC will u ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  8. Open System Manufacturing of Large Sensing/Weapons Platforms

    SBC: Applied Radar, Inc.            Topic: SB102005

    In order to maintain our nation’s technological superiority on air, sea and land, we must respond quicker to emerging threats and reduce the cost of major sensing platforms. Every DoD platform developed nowadays contains at least one sensor, whether it be RF, EO/IR, or acoustic. In fact, in a lot of recent developments, the platform is built around the sensor and exists only to support the senso ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  9. Miniaturized Cast Metal Integrated Components

    SBC: American Industrial Casting,            Topic: N/A

    Investment castings have well served both the military and commercial markets in such areas as waveguides and splitters for microwave applications, and for connectors, housings, heat sinks and mechanical parts for electronics, optical, instrumentation, and medical devices. Tomorrow's higher RF millimeter wave and communications electronics products, and more compact optical, instrumentation and m ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. High Surface Area Carbon Electrodes for Electrochemical Double Layer Capacitors

    SBC: EVANS CAPACITOR COMPANY            Topic: N/A

    A novel method for preparing carbon electrode structures having applications in electrochemical double layer capacitors (EDLCs) is described. The method for preparing these structures employs carbon (graphite) nano fiber materials and results in an electrode having both high surface area and high electronic conductivity; two essential characteristics for EDLC electrodes. The fabrication process ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government