Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Automated Identification and Sorting of Rare Earth Elements in an E-waste Recycling Stream

    SBC: National Recovery Technologies LLC            Topic: B

    Electronic waste (e-waste) is one of the most rapidly growing waste problems worldwide. Improper handling of e-waste results in vast amounts of toxic waste being sent to landfill and leaching into the water supply. Due to these concerns, e-waste recycling is a rapidly growing industry. Unfortunately, most current e-waste recycling processes rely on either manual hand sorting or differential densit ...

    SBIR Phase II 2014 Environmental Protection Agency
  2. Integrated, self-actuated, blood collection and biomarker purification device

    SBC: Tasso, Inc            Topic: SB122003

    Blood-based point-of-care (POC) diagnostics or remote diagnostics that require specialized equipment only available in centralized, commercial laboratories are currently limited by major logistical and technical barriers. Blood collection can be a traumatic, inconvenient, and inconsistent process that is based on decades-old technologies, such as the lancet-puncture, that are not amenable to new P ...

    SBIR Phase II 2014 Department of DefenseDefense Advanced Research Projects Agency
  3. PROBABILISTIC EXTENSIONS TO MODEL BASED PROGRAMMING LANGUAGES

    SBC: METAMORPH INC            Topic: SB142003

    This project will demonstrate the feasibility of extending the probabilistic design verification capabilities of the OpenMETA tool suite with probabilistic programming methods. These extensions will enable correct-by-construction design methodologies in the presence of component, system, environment, and epistemic uncertainties.The OpenMETA model- and component-based design tool suite for the manu ...

    SBIR Phase I 2014 Department of DefenseDefense Advanced Research Projects Agency
  4. Development of an In Situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: TopicH

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  5. Development of an in situ Thermal Extraction Detection System (TEDS) for Rapid, Accurate, Quantitative Analysis of Environmental Pollutants in the Subsurface

    SBC: Ion Signature Technology, Inc.            Topic: 09NCERP1

    The U.S. Environmental Protection Agency (EPA) in its publication Technology News and Trends in 2009 featured the Navy's work that saved 6 years and $3 million delineating chlorinated solvent plumes in soil and groundwater. The Navy used EPA's TRIAD process, which incorporates systematic planning, field analytics, and dynamic work strategies, during its hazardous waste site investigation. A direct ...

    SBIR Phase II 2010 Environmental Protection Agency
  6. A Novel MHD Power Generation and Energy Storage Concept for Re-Entry Vehicles

    SBC: LYTEC LLC            Topic: SB093014

    An innovate re-entry power system is proposed for development which collects the re-entry energy for a vehicle/module entering the atmosphere for LEO using an MHD power generator that is configured on the exterior surface of the vehicle nose to utilize the heated air sheath as the plasma for promoting the MHD power process. The MHD power produced is collect in an internal energy storage system tha ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  7. Integrated Airframe System

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: SB091013

    Building upon the successful Phase I demonstration of the feasibility of the Blended Hybrid Laminate (BHL) technology, the Phase II effort will seek to demonstrate and validate the technology at a relevant scale. Phase II confirmation of high cryo-pressure cycle life and high structural performance will open the door to the application of the technology to future high performance rockets, such as ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  8. Innovative Approaches to Low Power, Sub-Threshold Electronic Circuits

    SBC: CAMGIAN MICROSYSTEMS CORP            Topic: SB082045

    This program proposes to demonstrate an ultra-low power design methodology and circuits for digital logic employing advanced dynamic voltage scaling (DVS) for asynchronous NULL Convention Logic (NCL) circuits operating in sub-threshold to super-threshold voltage regimes. The power supply voltages of logic block partitions will be independently set by on-chip voltage controllers based on the data p ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  9. Nanometer-Precision Positioning System with 2mm x 2mm Range of Motion

    SBC: PIEZOMAX TECHNOLOGIES, INC.            Topic: BMDO99013

    nPoint proposes to design and construct a closed-loop 2mm range-of-motion, 2-axis nano-positioning system with unprecedented precision and resolution. There is considerable need for such a tool in near-future nanomanufacturing, characterization, and lithography. One example is scanned-probe tip-based nanomanufacturing. As such manufacturing comes to commercial fruition, accurate long-range positi ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  10. Functionally Graded Metallic Lattice Components (FGMLC) for Advanced Propulsion Component

    SBC: Orbital Technologies Corporation            Topic: SB082007

    ORBITEC proposes to develop functionally graded metallic lattice components for use in advanced rocket propulsion systems. The FGMLC material will utilize an internal intertwined lattice structure to join different constituents of the composite material. This lattice structure will allow a designed gradation from one material to another while maintaining each materials properties. The FGMLC will u ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government