You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. In-Plane Conductivity Improvement to Fiber Reinforced Composite Materials (MSC P4146)

    SBC: Materials Sciences LLC            Topic: A13070

    Missile modernization and future missile designs are utilizing more sophisticated and higher powered electronics in the pursuit of extended missile range, improved accuracy and precision targeting for striking enemy threats. Tight packaging and sophistication of these electronic systems can generate significant heat loads, which needs to be dissipated efficiently in order to maintain functionality ...

    SBIR Phase I 2014 Department of DefenseArmy
  2. Sensitive and Shape-Specific Molecular Identification

    SBC: RYON TECHNOLOGIES, INC            Topic: A11aT017

    The ability to rapidly detect, identify and monitor chemical agents remains a challenge of significant importance to the Armed Forces. Existing chemical sensing techniques have shortcomings that inhibit widespread implementation. To address this situation, Ryon Technologies is developing a portable instrument that is based on Rydberg Fingerprint Spectroscopy (RFS) in combination with mass spectrom ...

    STTR Phase II 2014 Department of DefenseArmy
  3. Environmental Control Unit with Integrated Thermal Storage

    SBC: Advanced Cooling Technologies, Inc.            Topic: OSD13EP1

    Advanced Cooling Technologies, Inc. (ACT) proposes the development of an Environmental Control Unit (ECU) that uses an integrated Phase Change Material (PCM) to provide thermal energy storage. The PCM is contained within the system. During the thermal energy regeneration or collection stages of operation, the coolant is pumped through the PCM to remove or deposit thermal energy, respectively. I ...

    SBIR Phase I 2014 Department of DefenseArmy
  4. BLAST: A System for Bandwidth- and Latency-Scalable Teleoperation

    SBC: Neya Systems, LLC            Topic: OSD13HS3

    Most current teleoperated ground vehicle systems require a high-bandwidth link to support either real-time streaming video or streamed 3D structure back to the operator control unit, and experience significant performance degradation in the presence of communication latencies as small as 100 milliseconds. These latency and bandwidth requirements severely hamper use of teleop systems in situations ...

    SBIR Phase I 2014 Department of DefenseArmy
  5. Residual Property Prediction for Damaged Composite Structures (MSC P 4141)

    SBC: Materials Sciences LLC            Topic: A12083

    Advanced composite material systems are vital to the development of lightweight, multi-functional Army missile systems.In addition to reducing the weight of the structure, composite materials provide the ability to expand the function of the structure by tailoring stiffness and strength characteristics for numerous applications such as solid rocket motor cases, missile airframes, missile guidance ...

    SBIR Phase II 2014 Department of DefenseArmy
  6. Air Combat Identification (ACID) Module

    SBC: DANIEL H. WAGNER ASSOCIATES, INCORPORATED            Topic: A08198

    In this Phase II SBIR project, Daniel H. Wagner Associates will develop a full-scale prototype Air Combat Identification (ACID) Module that will improve the accuracy of Track Management or Data Fusion systems when attempting to estimate the identity or classification of an Air target. The underlying technical mechanism by which the ACID module will estimate the targets identity is a Bayesian Netw ...

    SBIR Phase II 2014 Department of DefenseArmy
  7. Surface Engineering Technologies for Improved Gear Efficiency

    SBC: Wedeven Associates, Inc.            Topic: A12022

    The frictional losses in a gear mesh can be reduced by including super-finishing in the final manufacturing process. Phase I simulation tests of a hypoid rear axle gear shows a reduction in traction coefficient of 50 percent from an"as ground"surface to a high quality super-finished surface. This level of friction reduction is consistent for both low and high speeds. Phase I shows that costly s ...

    SBIR Phase II 2014 Department of DefenseArmy
  8. Ceramic Matrix Composite Materials for Transpiration Cooling

    SBC: COMBUSTION RESEARCH AND FLOW TECHNOLOGY INC            Topic: A14007

    Proposed effort will formulate and demonstrate the methodology for fabricating Porous Ceramic Matrix Composite (PCMC) transpiration plates with controlled levels of porosity, suitable for high-speed/high-temperature missile applications.Process will entail subjecting polymer composites to high-temperature pyrolysisprocess converting it to a porous ceramic matrix and locking the fiber reinforcement ...

    SBIR Phase I 2014 Department of DefenseArmy
  9. High Voltage Pulse Forming Network (PFN) Capacitor

    SBC: PolyK Technologies, LLC            Topic: A14063

    This project will develop high performance capacitor film and film capacitor manufacturing technologies to achieve high energy density in large-size, high-voltage sub-microsecond discharging pulsed power capacitors. The capacitor will be able to withstand DC voltage for over 3,000 hours and deliver more than ten shots without failure.

    SBIR Phase I 2014 Department of DefenseArmy
  10. Stress Testing Robustness to Exceptional Situations in Simulation

    SBC: Edge Case Research, Inc.            Topic: OSD141AU4

    Traditionally, live system testing has been by far the primary source of evidence of the safety of an autonomous vehicle. Live testing also plays a prominent role in demonstrating the safety of drive-by-wire and driver-safety technologies in the autom

    SBIR Phase I 2014 Department of DefenseArmy
US Flag An Official Website of the United States Government