Award Data

Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...

This STTR Phase I proposal proposes to design and develop reactive filter media using nanofiber technology to capture corrosion inducing particulate matter present in coastal region air. The fibrous filter media will be functionalized using ion exchange chemistry which is known to react with salt ions. The media will be characterized for its filtration performance, resistance to airflow, and dus ...

Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

GTL has been developing three transformational technologies that have the capability to disrupt the traditional launch vehicle paradigm. BHL composite cryotank technology provides a four times improvement over large Al-Li tanks, offering a 6 percentage point improvement in stage PMF. Superior Stability Engine is an innovative liquid rocket engine configured to maximize combustion stability margi ...

THIS PROJECT CONCERNS A UNIQUE APPROACH TO THE PRODUCTION OFHIGH ENERGY PRODUCT MAGNETS EMPLOYING RAPID SOLIDIFICATION METHODS. RIBBONS OF RARE EARTH-COBALT ALLOYS ARE RAPIDLY SOLIDIFIED TO PRODUCE A MICRON-SIZED COLUMNAR MICROSTRUCTUREAND THE COERCIVE FORCE DURING MAGNETIZATION IS CONTROLLED BY DOMAIN NUCLEATION MECHANISM. THIS EFFORT PRODUCES HIGH- CURIE-POINT, HIGH-ENERGY-PRODUCT PERMANENT MAGN ...