Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  2. Advancing High Energy Lithium-Sulfur Batteries

    SBC: Yardney Technical Products, Inc.            Topic: Z102

    Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  3. Safe, Large-Format Lithium Ion Batteries for Aircraft

    SBC: Yardney Technical Products, Inc.            Topic: AF141071

    YTP will develop technology that provides a high performance, modular Li-ion battery with: redundant safety features, safer thin, metal case cell designs; fin/micro-channel thermal control system; and an evaporating fluid system that rapidly quenches failing cells to prevent thermal runaway and fratricide. The end goal of the proposal is making a lighter, longer lasting, less expensive, safer JSF ...

    SBIR Phase I 2014 Department of DefenseAir Force
  4. Innovative Designs for Reliable Electro-Explosive Ordnance Devices

    SBC: SYSTEMS ENGINEERING ASSOCIATES CORPORATION            Topic: MDA12031

    Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  5. THIS PROJECT CONCERNS A UNIQUE APPROACH TO THE PRODUCTION OFHIGH ENERGY PRODUCT MAGNETS EMPLOYING RAPID SOLIDIFICATION METHODS.

    SBC: Stam Inc.            Topic: N/A

    THIS PROJECT CONCERNS A UNIQUE APPROACH TO THE PRODUCTION OFHIGH ENERGY PRODUCT MAGNETS EMPLOYING RAPID SOLIDIFICATION METHODS. RIBBONS OF RARE EARTH-COBALT ALLOYS ARE RAPIDLY SOLIDIFIED TO PRODUCE A MICRON-SIZED COLUMNAR MICROSTRUCTUREAND THE COERCIVE FORCE DURING MAGNETIZATION IS CONTROLLED BY DOMAIN NUCLEATION MECHANISM. THIS EFFORT PRODUCES HIGH- CURIE-POINT, HIGH-ENERGY-PRODUCT PERMANENT MAGN ...

    SBIR Phase I 1983 National Aeronautics and Space Administration
  6. THE RESEARCH HEREIN PROPOSED IS INTENDED TO ADDRESS THE CONTINUING PROBLEM OF ESTIMATING SOFTWARE COSTS OVER THE LIFE OF LARGE AND COMPLEX SOFTWARE PROJETS.

    SBC: Aquidneck Management Associate            Topic: N/A

    THE RESEARCH HEREIN PROPOSED IS INTENDED TO ADDRESS THE CONTINUING PROBLEM OF ESTIMATING SOFTWARE COSTS OVER THE LIFE OF LARGE AND COMPLEX SOFTWARE PROJETS. THE RESEARCH WILL ADDRESS ALL FACTORS THAT AFFECT SOFTWARE COSTS FROM A FUNCTIONAL STANDPOINT AS OPPOSED TO THE TRADITIONAL LINES-OF-CODE (PROGRAM SIZE) APPROACH. THE FACTORS WILL BE TRANSLATED INTO A MODEL THAT EMPHASIZES THE IMPORTANCE OF IN ...

    SBIR Phase I 1983 Department of DefenseAir Force
US Flag An Official Website of the United States Government