You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Sensitive and Shape-Specific Molecular Identification

    SBC: RYON TECHNOLOGIES, INC            Topic: A11aT017

    The ability to rapidly detect, identify and monitor chemical agents remains a challenge of significant importance to the Armed Forces. Existing chemical sensing techniques have shortcomings that inhibit widespread implementation. To address this situation, Ryon Technologies is developing a portable instrument that is based on Rydberg Fingerprint Spectroscopy (RFS) in combination with mass spectrom ...

    STTR Phase II 2014 Department of DefenseArmy
  2. Safe, Large-Format Lithium Ion Batteries for Aircraft

    SBC: Yardney Technical Products, Inc.            Topic: AF141071

    YTP will develop technology that provides a high performance, modular Li-ion battery with: redundant safety features, safer thin, metal case cell designs; fin/micro-channel thermal control system; and an evaporating fluid system that rapidly quenches failing cells to prevent thermal runaway and fratricide. The end goal of the proposal is making a lighter, longer lasting, less expensive, safer JSF ...

    SBIR Phase I 2014 Department of DefenseAir Force
  3. Innovative Designs for Reliable Electro-Explosive Ordnance Devices

    SBC: SEACORP, LLC            Topic: MDA12031

    Missiles, use electro-explosive devices (EEDs) to perform mulitple functions during operation. This effort seeks ways to improve on the EED"s reliability and lower the failure or inadvertent activation rate of these devices. During Phase I, SEA CORP investigated replacing EEDs with commercial off the shelf (COTS) automotive airbag inflators to perform the required pneumatic functions of variou ...

    SBIR Phase II 2014 Department of DefenseMissile Defense Agency
  4. Printed Low Voltage Munition Ignition Bridge

    SBC: Blue Sky Engineering, Inc.            Topic: A14059

    Advances in printing technologies may enable low-cost and flexible fabrication options for ignition bridges. The inherent nature of these direct write systems enables quick-turn prototyping for laboratory-scale development, while their high throughput allows low-cost production. The Blue Sky Engineering team proposes to develop printed explosive bridges based on its expertise in microdetonators ...

    SBIR Phase I 2014 Department of DefenseArmy
  5. 3-D Woven Conformal Antenna Structures

    SBC: Applied Radar, Inc.            Topic: AF05238

    New missions require that airborne radars operate at increasing ranges with higher target resolution. This combination necessitates the cost-effective deployment of large apertures while maintaining aerodynamic performance. Externally mounted antenna arrays are not a satisfactory solution due to the large size at low frequencies, for example with UHF foliage penetration radar. Another approach emp ...

    SBIR Phase II 2006 Department of DefenseAir Force
  6. Wideband Digital Beamforming Processor for Multi-Beam Phased Array

    SBC: Applied Radar, Inc.            Topic: MDA05034

    The objective of the proposed effort is to develop a digital beamforming (DBF) processor capable of generating multiple simultaneous receive beams with a wide (>500 MHz) instantaneous bandwidth (IBW). This would offer a significant improvement over a similar DBF processor with 15 MHz IBW that Applied Radar, Inc. previously developed for AFRL. The wide bandwidth is necessary for a number of high-re ...

    SBIR Phase I 2006 Department of DefenseMissile Defense Agency
  7. THE RESEARCH HEREIN PROPOSED IS INTENDED TO ADDRESS THE CONTINUING PROBLEM OF ESTIMATING SOFTWARE COSTS OVER THE LIFE OF LARGE AND COMPLEX SOFTWARE PROJETS.

    SBC: Aquidneck Management Associate            Topic: N/A

    THE RESEARCH HEREIN PROPOSED IS INTENDED TO ADDRESS THE CONTINUING PROBLEM OF ESTIMATING SOFTWARE COSTS OVER THE LIFE OF LARGE AND COMPLEX SOFTWARE PROJETS. THE RESEARCH WILL ADDRESS ALL FACTORS THAT AFFECT SOFTWARE COSTS FROM A FUNCTIONAL STANDPOINT AS OPPOSED TO THE TRADITIONAL LINES-OF-CODE (PROGRAM SIZE) APPROACH. THE FACTORS WILL BE TRANSLATED INTO A MODEL THAT EMPHASIZES THE IMPORTANCE OF IN ...

    SBIR Phase I 1983 Department of DefenseAir Force
US Flag An Official Website of the United States Government