Award Data

The Phase II SAI prototype will be developed using COTS GaN switches and CMOS drivers. During Phase II Alphacore will design and fabricate a rad-hard CMOS driver ASIC to provide electrical and on-chip algorithmic control of the GaN switches. The SAI and its components will be tested and measured under varying environmental conditions, including across temperature and radiation extremes. The GaN de ...

The increased use of sensing systems and large scale networked nodes with a variety of embedded sensors and imagery is creating a plethora of varied data that needs to be fused and interpreted for applications such as surveillance, reconnaissance, and air traffic controls. The need for persistent human analysis with high levels of proficiency is taxing human resources and cognitive abilities. In t ...

Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

Alphacore will develop a compact tunable surface mount component (capacitor bank) with tunable component range of more than 10:1. It will provide a tuning mechanism for a wide range of filter topologies with user selectable range of 10 bits. A capacitance selection from 100fF to 100pF using high density CMIM capacitors over small foot print for a variety of bands used in wide applications includin ...

Multiple innovative experimental X-ray techniques will be developed and demonstrated to characterize damage mechanisms/processes in advanced concretes under both quasi-static and dynamic loading.These techniques will provide tomographic information of the 3D damage morphology, as well as dynamic fracture information with high temporal resolution. The techniques can be extended to either unconfined ...

Missiles experience a wide range of thermal and mechanical environments due to the large variety of flight profiles.Since it is often the aerodynamic leading edge, the missile radome undergoes significant thermal and mechanical loading. The radome must survive the dynamic pressure loading, thermal shock and environmental erosion from airborne particulates (rain / sand) while performing as an elect ...

Kyma Technologies, the leading domestic supplier of crystalline III-N substrate materials, is teamed with leading AlGaN materials & device experts at Sandia National Laboratories (SNL) to develop high-quality n-type conductive 2-inch diameter epi-ready free-standing AlGaN substrates in support of next generation AlGaN devices with applications in ultraviolet optoelectronics, power electronics, and ...

The advanced amplifier system will allow military aircraft to be tested for EMP hardness.

Aura Technologies proposes to create a new Cost Estimating Relationship (CER) that takes into account advanced, rapidly emerging technologies for new aircraft development.