Award Data

Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

The research involves implementation of a comparison algorithm for firearm forensics. The Congruent Matching Cells (CMC) algorithm and its associated CMF, CMPS, and CMX methods have been developed by NIST yet do not appear in any commercially available software. As requested in the call for proposals, we will implement the algorithms in the C++ programming language, we will validate their performa ...

TECHNICAL ABSTRACT: Bottom Feeder will be a highly maneuverable Autonomous Underwater Vehicle (AUV), with a tethered operations option and modular sensor bay, to support benthic optical surveys, coral reef mapping and health assessment, and be expandable for future survey operations. It will integrate a low drag hullform, a minimum of four degrees of independent motion control, a highly efficient ...

TECHNICAL ABSTRACT: Commercial marine aquaculture operators face many operational hazards including disease, predators, husbandry operations, and environmental changes. Most of theses risks are only identified with constant surveillance and physical presence at a farm site. However, human observation of risk factors is expensive, slow, and sometimes ineffective. Sensors are available to monitor in ...

TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

TECHNICAL ABSTRACT: The mobile coastal monitor project is designed to prove out the research done in Phase I using a Proof of Concept demonstration craft. The Proof of Concept demonstrator will be a geometrically scaled version of the craft designed during Phase I. The Phase I craft, the Advanced Coastal Monitor (ACM) was designed to use state-of-the-art green power supplies and apply them as the ...

Rip currents cause multiple drowning deaths each year as swimmers are often unaware of the location and strength of coastal currents. Currently, ocean safety officials do not have an affordable and reliable commercial system which can measure coastal currents. The goal of this Phase I study is to test a stereo camera system to measure the speed, direction, and location of alongshore currents and ...

The objective of the proposed work is to determine whether Dioxide Materials' miniature C02 sensors have the potential to be adapted for autonomous measurement of ocean carbon. The existing sensors have many advantages for measurements of ocean carbon. They are much smaller and less costly than the existing sensors, work with much smaller gas samples, and use much less power. The sensors were d ...

The goal of this project is to develop, implement, and experimentally validate a new Differential Global Navigation Satellite System (DGNSS) capable of providing sub-centimeter positioning accuracy for quasi-static scientific, mapping, and survey applications. The main feature of the proposed DGNSS solution is that it leverages GNSS reference data from existing NOAA's Continuously Operational Ref ...