List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. HQ-55 VTOL UAS for Ship Based Operation

    SBC: Latitude Engineering, LLC            Topic: 832

    TECHNICAL ABSTRACT: The Hybrid Quadrotor concept, developed by Latitude Engineering, combines the high power density of electric motors and propellers with the high energy density of a piston engine and liquid fuel. Together, each technology enables maximum performance in HQ's two regimes of flight: the electric system is responsible for lift while hovering (high power, short endurance), and the g ...

    SBIR Phase II 2018 Department of CommerceNational Oceanic and Atmospheric Administration
  3. Airborne Imaging LIDAR for Biomass Estimation

    SBC: Arete Associates            Topic: N/A

    There is a need for accurate and cost effective airborne techniques to estimate fish biomass in the open ocean. Arete proposes to develop in Phase I optimal detection algorithms using existing imaging LIDAR data collected with the Fisheye(R) sensor. These algorithms will be developed to allow real-time detection of fish and fish schools, discrimination between fish and ambient clutter, and discr ...

    SBIR Phase I 1995 Department of Commerce
  4. Optical Contouring of Unloaded and Loaded Foot Shape for Manufacturing Technology

    SBC: Wyko Corp.            Topic: N/A

    WYKO proposes to demonstrate the feasibility of an optical contouring system that will quickly measure the shape of both the resting and loaded foot to allow automated manufacture of therapeutic footwear directly from the data provided in an open architecture format. This bypassess the steps of manually forming casts and forming visual opinions of loaded skeletal structure. WYKO will integrate t ...

    SBIR Phase I 1995 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government