List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Foreign Like Weapon Production Capability

    SBC: Knight's Armament            Topic: SOCOM172003

    In the proposed effort, KAC will establish a process for reverse engineering and redesigning foreign weapons, primarily the 7.62x54R PKM and the 12.7x108mm NSV. Our engineers will use laser scanning to reverse engineer weapons from our on-site museum. We will reverse engineer the bolt from the PKM in order to demonstrate the viability of the laser scanner, our engineers, and our machine shop to co ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  2. Group 2 (<55lbs) Unmanned Aerial System for Special Operations Forces Tactical-Level Intelligence, Surveillance, and Reconnaissance Operations

    SBC: THORPE SEEOP CORP            Topic: SOCOM172005

    A technical approach is proposed to survey the industry for state of the art capabilities in terms of the SOCOM mission requirements described in the solicitation for the Group 2 Tactical ISR UAS. The results of the survey will select a configuration of potential candidate UAS that would meet the threshold and ultimately objective goals stated.

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  3. Handheld Hidden Chamber Detection

    SBC: VAWD APPLIED SCIENCE & TECHNOLOGY CORPORATION            Topic: SOCOM173004

    VAWD has extensive experience developing technologies and products for Sense Through The Wall (STTW) and RF Penetration through materials. Based on our experience we believe that the RF spectrum is a natural fit to solve this problem. Therefore we have constrained our trade space for an optimized microwave technology solution.VAWD proposes techniques that will use Multi-Frequency discrimination in ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  4. Reheating Air Inside Diving Equipment and Regulators (RAIDER)

    SBC: Paragon Space Development Corporation            Topic: SOCOM182003

    Military divers are experiencing negative medical side effects from inhalation of cold air or mixed gas (HeO2) while diving with a closed-circuit breathing apparatus.Therefore, SOCOM is looking for an innovative device that will reheat a divers inspired breathing gas to prevent a diver from experiencing hypothermia.Paragon will apply relevant experience in the design and manufacturing of active an ...

    SBIR Phase I 2018 Department of DefenseSpecial Operations Command
  5. Innovative CubeSat Payloads for USSOCOM Space Missions

    SBC: A-Tech Corporation            Topic: SOCOM17003

    Small satellites have proven capable and cost effective, and innovative payloads and technologies will expand the mission space that CubeSats can support. ATA proposes to build a CubeSat-sized laser communications prototype payload, adapting high photon efficiency optical communications techniques to achieve data transfer rates up to 100 mega-bits per second (Mbps) with the small apertures require ...

    SBIR Phase II 2018 Department of DefenseSpecial Operations Command
  6. Ultra-High Power Density Metal Supported SOFC Stack for High Efficiency Propulsion and Power Systems

    SBC: ATS-MER, LLC            Topic: OSD13EP4

    This Phase I SBIR OSD project proposes the development and testing of a porous metal anode-supported intermediate-temperature solid oxide fuel cell (PMS-IT-SOFC) that exhibits high electrochemical efficiency, high degree of fuel utilization (reformed JP-8, diesel, or dodecane), and low operating temperature characteristics intended for high efficiency, logistic-fueled propulsion and power systems ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
  7. Advanced Heavy Fuel Injection System for UAS/UGS Applications

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: OSD13PR1

    Mainstream Engineering will use state-of-the-art technology and manufacturing processes to develop an innovative, high speed, lightweight fuel injection system capable of providing multiple injections per engine cycle at engine speeds up to 6000 RPM. To overcome the barriers associated with spark ignition of direct-injected heavy fuel (JP5, JP8, etc.), Mainstream will leverage previous internal re ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
  8. Improved Turbo/Superchargers for UAS/UGS Application

    SBC: Florida Turbine Technologies Inc.            Topic: OSD13PR5

    Florida Turbine Technologies proposes an oil-free bearing shaft support system for an Unmanned Aerial System (UAS) internal combustion (IC) engine turbocharger. During the course of Phase 1, FTT will design a light-weight high performance UAS turbocharger for IC engines in the 150 horsepower class. A conceptual design of the turbocharger system capable of providing sufficient boost pressure wil ...

    SBIR Phase I 2014 Department of DefenseOffice of the Secretary of Defense
  9. Affordable Spinel Transparent Armor

    SBC: ATS-MER, LLC            Topic: SOCOM14002

    Transparent armor is very important to the survivability and situational awareness for the crews of modern land, marine or aviation vehicles. Additionally to the common armor requirements (low areal density and high ballistic performance) transparent armor should provide high infrared and visual transmittance. Ceramic ballistic windows meet these requirements, but they often suffer from unaffordab ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command
  10. Conformal Onboard Light-weight Durable Passive Low-cost Aquatic Thermal Emission System (COLDPLATES)

    SBC: Paragon Space Development Corporation            Topic: SOCOM14005

    Paragon Space Development Corporation will provide SOCOM with a low-cost, conformal, closed-loop cooling system that is highly resistant to damage and provides superior cooling performance to existing raw water cooling alternatives. This proposed innovation is simple to manufacture, retrofit, and in its final form, is anticipated to entail little to no mass increase over the current system. The c ...

    SBIR Phase I 2014 Department of DefenseSpecial Operations Command

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government