You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Low CSWAP Multi-Beam TCDL Antenna System

    SBC: Applied Radar, Inc.            Topic: N132089

    Applied Radar proposes to develop a high-gain low cost, size, power and weight (low-CSWAP) tactical common data link (TCDL) antenna for the Firescout and Predator UAVs. The improved TCDL antenna will support 6 or more nodes of high-gain full-duplex communication at 21.42 MBPS in a star network configuration with 360 degree coverage out to 110 nm slant range. In Phase 1, we will design, fabricate a ...

    SBIR Phase I 2014 Department of DefenseNavy
  2. Compact Advanced Hypoxia Training System (CAHTS)

    SBC: CREARE LLC            Topic: N132093

    Hypoxia is a dangerous condition for naval aviators that impacts critical thinking, resulting in a lack of awareness that prevents aircrew from taking appropriate corrective actions. Practical hypoxia training allows pilots to experience the effects of hypoxia so that the symptoms are more readily recognized. Current training systems include both hypobaric chambers and reduced oxygen breathing sys ...

    SBIR Phase I 2014 Department of DefenseNavy
  3. A High-Precision, High-Resolution Turbine Blade Inspection System

    SBC: CREARE LLC            Topic: N132097

    Modern jet engine turbine blades are single-crystal superalloy structures with excellent resistance to high-temperature creep, allowing tight tolerances to be maintained over the blade"s life. However, turbine blades have complicated features that can promote the growth of discrete crystal grains that can lower the part"s creep resistance and may lead to catastrophic engine failure. Current inspec ...

    SBIR Phase I 2014 Department of DefenseNavy
  4. Development of an Advanced Bearing for Extreme Service Environments

    SBC: CREARE LLC            Topic: N132103

    Aircraft carriers are the backbone of the U.S. Navy"s fleet, which operates around the globe, with the sole purpose of launching and recovering aircraft to support U.S. military and peacekeeping interests. The ability to quickly and safely launch aircraft can become a key limitation for an aircraft carrier when trying to deliver the maximum amount of warfighter capability. Currently, the wheel bea ...

    SBIR Phase I 2014 Department of DefenseNavy
  5. Modular Anatomical Test Target for Non-Lethal Weapons

    SBC: CREARE LLC            Topic: N132084

    Non-lethal weapons (NLWs) are increasingly being used in conflict situations where lethal force is undesirable. As new non-lethal systems are developed, careful evaluation is required to confirm both effectiveness and non-lethality over various payload and range conditions. Computer simulations can be an extremely useful NLW effects evaluation tool at a significantly reduced cost compared with tes ...

    SBIR Phase I 2014 Department of DefenseNavy
  6. A Low Cost Electromagnetic Induction Ground Fault Detector

    SBC: CREARE LLC            Topic: N112133

    Machinery Control System (MCS) cabling faults can be difficult to identify and locate since as many as 3,000 to 5,000 I/O points are used and multiple junctions exist in each cable. A single MCS fault can require as many as four maintainers and a full day of troubleshooting to isolate and resolve, and MCS capability can be substantially reduced during this process. Creare is developing a low-cost ...

    SBIR Phase II 2014 Department of DefenseNavy
  7. Low-Profile, Broadband, Shear-Mode SONAR Transducer for Deep Submergence Applications

    SBC: Btech Acoustics, LLC            Topic: N141066

    BTech proposes the design and development of a low-profile, broadband, shear-mode piezocrystal acoustic transducer for deep submergence applications. The Phase I effort considers evaluation of design variants of shear mode transducers with increased pressure operation/tolerance and tradeoffs associated with the same. Design feasibility is supported with calculations of expected performance and whe ...

    SBIR Phase I 2014 Department of DefenseNavy
  8. Low-Cost Compact Microchannel Heat Exchanger With Uniform Flow Distribution

    SBC: CREARE LLC            Topic: N141068

    Increasing use of high power density electronics systems in military vehicles and buildings will significantly increase thermal loads of their Environmental Control Systems (ECS). Advanced thermal management technology is needed for these ECSs. We propose to develop a highly effective, low-cost heat exchanger that will enhance thermal effectiveness of evaporators in vapor compression systems. The ...

    SBIR Phase I 2014 Department of DefenseNavy
  9. TECHNICAL PROPOSAL FOR THE SHIPBOARD LIGHTING SYSTEM (AVIATION LIGHTING SYSTEM-CONTROL PANEL SET (ALS-CPS)) SBIR N04-081 PHASE II

    SBC: CRITICAL COMMUNICATIONS, CONTROLS AND INSTRUMENTS, LLC            Topic: N04081

    This Proposal identifies the tasks to be performed by C3I for the partial completion of the Aviation Lighting System Control Panel Set (ALS-CPS) technology developments of SBIR Topic N04-081. The Advanced Lighting System Control Panel Set (ALS-CPS) components include a 12 Control Panel (12 CP), Network Switch (NS), Modular Protocol Controller (MPC), Variable Transformer Power Control Module (VTPCM ...

    SBIR Phase II 2014 Department of DefenseNavy
  10. Mobile Vibratory Impactor for AI-Based Detection of Void under AM-2 Matting

    SBC: AAC International            Topic: N141012

    A mobile vibratory roller impactor system is proposed, using AI-based pattern recognition for identification of voids through analyzing the tapping force on the AM-2 mat exerted by the roller impactor. The Phase I project will conduct feasibility demonstration of the proposed technology. The basic concepts of the proposed technology will be implemented and demonstrated on a test pad or subgrade co ...

    SBIR Phase I 2014 Department of DefenseNavy
US Flag An Official Website of the United States Government