List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Commercializing the Effective K-3 Assessment to Instruction (A2i) Intervention to Reduce Cost and to Scale Access to the Benefit of More Students

    SBC: LEARNING OVATIONS, INC.            Topic: N/A

    Purpose: Students who fail to achieve proficient levels of literacy are at increased risk for grade retention, referral to special education, and dropping out of high school. The kindergarten through 3rd grade years are particularly important for students to gain a strong foundation in reading as those who continue to struggle with reading are significantly less likely to achieve reading proficien ...

    SBIR Phase I 2014 Department of Education
  2. Commercializing the Effective K-3 Assessment to Instruction (A2i) Intervention to Reduce Cost and to Scale Access to the Benefit of More Students

    SBC: LEARNING OVATIONS, INC.            Topic: N/A

    Purpose: Students who fail to achieve proficient levels of literacy are at increased risk for grade retention, referral to special education, and dropping out of high school. The kindergarten through 3rd grade years are particularly important for students to gain a strong foundation in reading as those who continue to struggle with reading are significantly less likely to achieve reading proficien ...

    SBIR Phase II 2014 Department of Education
  3. CFD-Based Over-Determined Trim Analysis for Optimum Aerodynamic Efficiency

    SBC: Zona Technology, Inc            Topic: A304

    The overall objective of this Phase I project is to develop a nonlinear trim module in FUN3D for enabling the determined and over-determined trim analyses to be performed by FUN3D with static aeroelastic effects. Based on an optimization formulation, the over-determined trim analysis can determine the optimum control surface scheduling of multiple control surfaces to achieve the best aerodynamic e ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  4. Integration of Complex Geometry, 3D Woven Preforms via Innovative Stitching Technique

    SBC: T.E.A.M., INC.            Topic: H701

    Thick, 3D woven carbon/phenolic composites offer potential improvement over legacy thermal protection systems (TPS) for re-entry vehicle heat shield applications. However due to the scale and complexity of typical re-entry vehicle structures, it is likely that multiple 3D woven panels would need to laid up to create the overall heat shield, creating a potential weak spots at the panel joints. ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  5. Advancing High Energy Lithium-Sulfur Batteries

    SBC: Yardney Technical Products, Inc.            Topic: Z102

    Lithium-Ion batteries have been a main source of energy for many aerospace applications over the past decade. Future space missions are facing a number of challenging requirements, including significant increase in specific energy, approaching 500 Wh/kg, and energy density of 700 Wh/l at cell level. Compared to state-of-the-art technology today, a reduction in mass and volume are necessary, along ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  6. Additive Manufacturing Synthesis of Novel Materials for 3000 Degree

    SBC: ATS-MER, LLC            Topic: H504

    Environmentally durable material systems capable of operating at temperatures from 1500 to 3000?C while maintaining structural integrity are enabling for future hot structure hypersonic vehicles. State-of-the-art ceramic matrix composite CMC's and other established refractories lack stability at these high temperatures. The plasma transferred arc (PTA) additive manufacturing (AM) process has dem ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  7. Atmospheric Lidar with Cross-Track Scanning

    SBC: LITESPAR, INC.            Topic: E301

    An eye-safe, multispectral cross-track scan subsystem with a large receiver aperture and a narrow FOV is proposed for the NASA Cloud Physics Lidar (CPL) to increase the horizontal scan area coverage. The /-14 degree cross-track scan capability will cover /- 5 km from nadir at a 20 km altitude. The cross-track scanner uses a bidirectional scan pattern, which collects 10,000 data points per cross ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  8. Parallel Enhancements of the General Mission Analysis Tool

    SBC: Thinking Systems, Inc.            Topic: H904

    The General Mission Analysis Tool (GMAT) is a state of the art spacecraft mission design tool under active development at NASA's Goddard Space Flight Center (GSFC). GMAT is an open source project, periodically releasing code on publicly accessible repositories. The tool has recently been operationally certified for use planning maneuvers for the Advanced Composition Explorer (ACE). The current ...

    SBIR Phase I 2014 National Aeronautics and Space Administration
  9. Highly Efficient Solid Oxide Electrolyzer & Sabatier System

    SBC: Paragon Space Development Corporation            Topic: H101

    Paragon Space Development Corporation (Paragon) and ENrG Incorporated (ENrG) are teaming to provide a highly efficient reactor for carbon monoxide/carbon dioxide (CO/CO2) conversion into methane (CH4). The system is a gravity-independent, compact, leak-tight, Solid Oxide Electrolyzer (SOE) system with embedded Sabatier reactors (ESR). Applying Corning Incorporated (Corning) Intellectual Property ( ...

    SBIR Phase II 2014 National Aeronautics and Space Administration
  10. Integrated Electrolysis & Sabatier System for Internal Reforming Regenerative Fuel Cells

    SBC: Paragon Space Development Corporation            Topic: H801

    Paragon Space Development Corporation® (Paragon) will advance our Solid Oxide Electrolysis / embedded Sabatier reactors (SOE/ESR) system to generate power from its oxygen (O2) and methane (CH4) products. Leveraging our SOE/ESR technology, Paragon can offer a carbon deposition resistant system capable of internally steam reforming CH4 and generating power in fuel cell mode. Minimal water is re ...

    SBIR Phase I 2014 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government