You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Periodontal Probe

    SBC: ABIOMED, INC.            Topic: N/A

    The objective is an optical periodontal probe tailored to automatically measure and record multiple tissue parameters deemed important for disease detection and treatment monitoring. As a first step in the development of a multi-functional device, a probe designed to mimic the visual measurements made by dental clinicians to determine pocket depth, bleeding on probing (BOP) and tissue coloration w ...

    SBIR Phase II 1996 Department of Health and Human Services
  2. Intelligent Flexible Fixturing System

    SBC: ACT Research Corporation            Topic: N/A

    Two approaches are proposed to attack the problems of fixturing process. First, a novel hardware holding system, Dexterous Vise, is proposed. Functionally, a single Dexterous Vise is capable of revealing four faces of the clamped workpiece to the cutting tool without re-fixturing, which actually increases one degree of freedom to the machine tool. A pair of Dexterous Vises, the "Dual-Vise", ena ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  3. Automated Accurate Aircraft Weighing System

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, an innovative aircraft weighing system based on a set of piezopolymar film pad sensors is described. The wieghing system, which would operate automatically as the aircraft taxi over it, would be unobtrusive, accurate, and reliable. These sensor pads could be integrated into the flight deck surface below the grated rubber surface finish. These thin (20-30 mils) piezopolymer sensing pads ...

    SBIR Phase II 1996 Department of DefenseNavy
  4. Smart, Compact Packages for Vibration Control

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, ACX proposes to develop compact, low cost, integrated smart packs for vibration reduction. Each package would include actuators and sensors, drive and signal conditioning electronics as well as simple controllers to yield a self standing solution to vibration problems. The electronics module would be low cost and compact. The pack would run off of standard available power supplies and w ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  5. Catalytic Conversion Recycling Process for Composite Aircraft Components

    SBC: Adherent Technologies, Inc.            Topic: N/A

    Cured aircraft composite materials present a particularly difficult challenge for recycling technology. Those materials have mostly thermosetting epoxy matrices and occur in intimate association with metals, paints, and coatings. Current techniques for recycling thermoset composites, mostly for automotive sheet molding compounds (SMC), involve pulverizing the material for use as fillers. Th ...

    SBIR Phase I 1996 Department of DefenseNavy
  6. Tertiary Recycling Process for Shipboard Plastic Processor Product

    SBC: Adherent Technologies, Inc.            Topic: N/A

    A novel tertiary recycling process is proposed for investigation as an economical means for recycling shipboard plastic waste. Early development work has shown that this process can convert a wide variety of polymers and composites into low molecular weight hydrocarbons at temperatures below 200'C. The hydrocarbons produced can then be reused as chemicals, fuels, or monomers. Metal, glass, and fil ...

    SBIR Phase I 1996 Department of DefenseNavy
  7. Electromagnetic Coupling to Satellite Cavities

    SBC: ADVANCED ELECTROMAGNETICS            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Apparatus for the Testing of Solid Cryogenic Mechanical Properties

    SBC: Advanced Materials Corp            Topic: N/A

    The proposed effort in Phase I is to identify properties of propellants that solidify at cryogenic temperatures, "cryosolids", that will be tested in Phase Ii and to deliver a detailed design of a cryogenic testing device. This device will be able to measure tensile, flexural, shear and compressive strength, elastic moduli, and hardness of these cryosolids. In addition, this device will be able ...

    SBIR Phase I 1996 Department of DefenseAir Force
  9. PHASED ARRAY SYSTEM FOR MRI GUIDED ULTRASOUND SURGERY

    SBC: Advanced Surgical Systems,            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  10. Using Simulation/Animation Modeling Techniques to Optimize the ROCC/SOCC Computer communications System

    SBC: Advanced Visual Data, Inc.            Topic: N/A

    The Joint Surveillance System Computer-Communications System (C-CS) provides mission-critical support to Region Operations Control Centers (ROCCs), Sector Operations Control Centers (SOCCs), and North American Aerospace Defense Command (NORAD). New mission requirements (drug interdiction) and new sensor/system developments exceed the scope of the original design and mission of the C-CS. As a resu ...

    SBIR Phase II 1996 Department of DefenseAir Force
US Flag An Official Website of the United States Government