You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY23 is not expected to be complete until September, 2024.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Optical Periodontal Probe

    SBC: ABIOMED, INC.            Topic: N/A

    The objective is an optical periodontal probe tailored to automatically measure and record multiple tissue parameters deemed important for disease detection and treatment monitoring. As a first step in the development of a multi-functional device, a probe designed to mimic the visual measurements made by dental clinicians to determine pocket depth, bleeding on probing (BOP) and tissue coloration w ...

    SBIR Phase II 1996 Department of Health and Human Services
  2. VLST FLUID SYSTEM FOR DEPOSITION OF DNA PROBE ARRAYS

    SBC: Accelerator Technology Corporation            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
  3. Intelligent Flexible Fixturing System

    SBC: ACT Research Corporation            Topic: N/A

    Two approaches are proposed to attack the problems of fixturing process. First, a novel hardware holding system, Dexterous Vise, is proposed. Functionally, a single Dexterous Vise is capable of revealing four faces of the clamped workpiece to the cutting tool without re-fixturing, which actually increases one degree of freedom to the machine tool. A pair of Dexterous Vises, the "Dual-Vise", ena ...

    SBIR Phase I 1996 Department of DefenseOffice of the Secretary of Defense
  4. Automated Accurate Aircraft Weighing System

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, an innovative aircraft weighing system based on a set of piezopolymar film pad sensors is described. The wieghing system, which would operate automatically as the aircraft taxi over it, would be unobtrusive, accurate, and reliable. These sensor pads could be integrated into the flight deck surface below the grated rubber surface finish. These thin (20-30 mils) piezopolymer sensing pads ...

    SBIR Phase II 1996 Department of DefenseNavy
  5. Smart, Compact Packages for Vibration Control

    SBC: Active Control eXperts, Inc.            Topic: N/A

    Herein, ACX proposes to develop compact, low cost, integrated smart packs for vibration reduction. Each package would include actuators and sensors, drive and signal conditioning electronics as well as simple controllers to yield a self standing solution to vibration problems. The electronics module would be low cost and compact. The pack would run off of standard available power supplies and w ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  6. Special Architecture to Break Speed Barriers in Real-Time Applications for Automatic Target Recognition

    SBC: 3D-Computing, Inc.            Topic: N/A

    The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Processing of Selectively-Discontinuous-Fiber (SDF) Composite Materials

    SBC: Advanced Composite Operations            Topic: N/A

    This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

    SBIR Phase I 1996 Department of DefenseAir Force
  8. Apparatus for the Testing of Solid Cryogenic Mechanical Properties

    SBC: Advanced Materials Corp            Topic: N/A

    The proposed effort in Phase I is to identify properties of propellants that solidify at cryogenic temperatures, "cryosolids", that will be tested in Phase Ii and to deliver a detailed design of a cryogenic testing device. This device will be able to measure tensile, flexural, shear and compressive strength, elastic moduli, and hardness of these cryosolids. In addition, this device will be able ...

    SBIR Phase I 1996 Department of DefenseAir Force
  9. Augmenting Fire Fighter Training With Virtual Reality Technology

    SBC: 5, Inc. (full Immersion            Topic: N/A

    Current fire fighting training methods are possibly lacking maximum effectiveness due to increasing safety and environmental regulation. Additionally, performance measurement in large classes becomes difficult unless trainees have identical training scenarios and evaluations. This proposal details the analysis of current training methods and subsequent emulation of them using virtual reality (VR ...

    SBIR Phase II 1996 Department of DefenseAir Force
  10. PHASED ARRAY SYSTEM FOR MRI GUIDED ULTRASOUND SURGERY

    SBC: Advanced Surgical Systems,            Topic: N/A

    N/A

    SBIR Phase I 1996 Department of Health and Human Services
US Flag An Official Website of the United States Government