For best search results, use the search terms first and then apply the filters

The Award database is continually updated throughout the year. As a result, data for the given year is not complete until April of the following year. Annual Reports data is a snapshot of agency reported information for that year and hence might look different from the live data in the Awards Information charts.

  1. Advanced Analytical Techniques for Determining Metal Speciation in Contaminated Soils

    SBC: ADAM INSTRUMENT CO., INC.            Topic: N/A

    The primary objective of the proposed project is to develop innovative new analytical instrumentation and methodology capable of non destructive detection and identification of trace amounts of metals in contaminated soils. Once developed, the instrumentation and methodology could be interfaced with a reaction sample characterization before and after treatment. The project has been divided into ...

    SBIR Phase II 1996 Department of DefenseArmy
  2. Adhesive Bond Integrity of Composites

    SBC: Adler Consultants, Inc.            Topic: N/A


    SBIR Phase I 1996 Department of DefenseNavy
  3. Integrated Micromachined Angular Rate Sensor



    SBIR Phase I 1996 Department of DefenseArmy
  4. Development of Time-Domain Planar Near-Field Scanning Measurement Techniques

    SBC: ANALYTIC DESIGNS INC            Topic: N/A

    Near-field frequency domain meaasurements of antennas over a planar aperture are commonly used to obtain far-field patterns. This technique has now bben formulation in the time domain, which is very desirable for short pulse signals. An additional benefit, particularly significant for antennas with low-sidelobes, arises from time domain measurements in that edge effects of a finite a ...

    SBIR Phase I 1996 Department of DefenseAir Force
  5. Solid State Neutron Detector

    SBC: Applied Sciences            Topic: N/A

    Phase I proposes to demonstrate an easy-to-operate, inexpensive room temperature neutron detector based on boron-doped diamond. The detector would produce an immediate signal related to low-level neutron irradiation. The concept exploits the high neutron absorption cross section of B-10, which results in excellent sensitivity. The charge carriers generated in the diamond by a neutron absorption ev ...

    SBIR Phase I 1996 Department of DefenseMissile Defense Agency
  6. Low Cost Radar

    SBC: Avionics Unlimited, Inc.            Topic: N/A


    SBIR Phase I 1996 Department of DefenseAir Force
  7. Search For Mobile And Relocatable Targets (SMART)

    SBC: BONN CORP.            Topic: N/A

    BONN Corporation (BONN) has chosen to concentrate on a methodology that computes an optimal target search in near-real-time, with the capability of accommodating user-definable optimality based upon time / pathlength, probability of target detection target value, and survivability in a dense threat environment. This methodology will be extensible to address multiple airborne platforms and multipl ...

    SBIR Phase I 1996 Department of DefenseNavy
  8. A Low Cost Process for Producing Graphite Reinforced Cyanate Ester Composites for Spacecraft Thermal Management Applications

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to demonstrate the feasibility of applying Cast Metal Composite's unique pressure infiltration process to the production of lightweight, dimensionally stable, high thermal conductivity, high stiffness cyanate ester resin matrix composites for spacecraft subsystems and advanced thermal management systems. The low cost pressure infiltration process will be c ...

    SBIR Phase II 1996 Department of DefenseAir Force
  9. Affordable Lightweight Electronic Packaging Materials

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to develop and demonstrate a low-cost, high thermal conductivity, low mass density material for use in electronic packaging. Target material characteristics are: less than aluminum heat sinks, thermal conductivity at least 200 W/m-k, and mass density less than aluminum. To address this objective, Cast Metal Composites, Inc. will produce lightweight, high ...

    SBIR Phase I 1996 Department of DefenseDefense Advanced Research Projects Agency
  10. Improved Thermal Bond Material for Electronic Components

    SBC: Cast Metal Composites            Topic: N/A

    The objective of the proposed program is to design, using graphite fiber fabric, high thermal conductivity thermal doubler/electronic component bonds that can be debonded easily at low temperatures for repair. The design and selection of materials for these bonds will be guided by computer modeling and analysis work. The thermal performance of polymer bond materials reinforced with high thermal c ...

    SBIR Phase I 1996 Department of DefenseNavy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government