Award Data

The 3D-Flow Processor system is a new concept in very fast, real-time system architectures. The throughput of this system can reach up to 100 millin frames/sec, yet unlike currently available systems of comparable speed, it is fully programmable and extremely flexible. Algorithms for processing information from the input of multiple sensor can easily be implemented on a 3D-Flow system to achiev ...

This proposal is directed at creating discontinuous unidirectional composite from continuous unidirectional prepreg. The process, Selectively-Discontinuous-Fiber (SDF), introduces micro-cuts in preimpregnated unidirectional materials at specified locations. This process will allow unidirectional composite prepreg to be used for the fabrication of complex-compound components that have be ...

The AES International Corporation (AESI) of College Station, Texas, in concert with Texas A&M University personnel, can build an airborne ground-penetrating radar system to detect land mines from an Unmanned Airborne Vehicle (UAV). The radar itself will be a totally new and fully airworthy flight demonstration unit, the principles and characteristics of which will be conceptually similar to two p ...

This research project will investigate the use of optical-fiber sensors within a solid rocket motor case. THese sensors will be multi-functional and possess the ability to measure displacement (or strain) and temperature. They will be capable of embedment "in-site" or can be bonded to the exterior of motors that have already been manufactured. If successful, the effect of forces exerted on the ...

The objective of this project is to establish the technical foundation for, and the feasibility of, a tactical decision aid that can be used by a commander and staff to develop and analyze courses of action (COA). This project will combine object-oriented and distributed computing technologies into an integrated system architecture and design. Successful techniques from artificial intelligence r ...

Measuring temperature in specimens being heated by electromagnetic energy requires the use of special probes. The temperature probes must be specially designed to minimize electromagnetic field perturbations. Several types of non-perturbing temperature measurement probes have been investigated and developed. Many employ optical fibers rather than electrical conductors to avoid the e ...

We propose to develop software algorithms which can be integrated in a Distributive Interactive Simulation (DIS) environment and which model the following wartime effects. Explosion fireball and smoke Building structure failures Debris throws and roll Drift of chemical agents and smoke The Phase I development of these algorithms will be accomplished utilizing esta ...

BioMedical Enterprises, Inc. (BME) and NASA Ames Research Center (NASA ARC) are developing NASA's aerospace insulation materials for use as an osseous scaffolding to facilitate and support bone wound healing and regeneration. Fibrous reusable composite insulation (FRCI) developed by NASA for use on the space shuttle was modified to promote bone ingrowth and will be evaluated for its ability to fo ...

BONN Corporation (BONN) has chosen to concentrate on a methodology that computes an optimal target search in near-real-time, with the capability of accommodating user-definable optimality based upon time / pathlength, probability of target detection target value, and survivability in a dense threat environment. This methodology will be extensible to address multiple airborne platforms and multipl ...

This SBIR Phase I program will test the feasibility of achieving a high effective radar cross section over extremely wide bandwidth in a small, low-cost, RF repeater module, using a retrodirective array of a very small repeaters. The array factors effectively multiply the RF characteristics of a single channel to realize high array gain and power using low-performance amplifier. An integral goal ...