List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Microscopic Traffic Flow Simulation Models- An Open Source Approach

    SBC: New Global Systems for Intelligent Transportation Management            Topic: 081FH5

    PHASE II TECHNICAL OBJECTIVE The major objective of this Phase II proposal is to establish open source traffic simulation model and software, and to develop application programming interfaces to accommodate future traffic research needs. Objectives will be accomplished by building and demonstrating FOMM, an open source traffic simulation model and software. Furthermore, to accommodate future resea ...

    SBIR Phase II 2011 Department of Transportation
  2. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy
  3. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: Nevada Composites, Inc.            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  4. WASP-III Advanced Reconnaissance Device Network (WARDN)

    SBC: MAV6            Topic: SB111004

    The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  5. Direct Plasma Production from Electric Solid Propellant for High Velocity Launch Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: SB112002

    As an alternative to double-base propellants we propose electric solid propellants (ESP) as a safe, green, higher performance alternative to double-base propellants for high velocity electro thermal chemical (ETC) canons. These new energetic materials are inherently safe, with ignition only possible via the sustained supply of electrical power and not by spark, flame or even bullet impact. A maj ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  6. Improved Thrust Termination Modeling for Solid Rocket Motors

    SBC: SIERRA ENGINEERING, INC.            Topic: MDA10022

    To improve the predictive capabilities of solid rocket motor end-of-burn phenomena, two analysis tools will be further developed. An existing engineering tool will go through continued development and validation, while an existing solid rocket ballistics model, built and demonstrated within a commercial CFD platform, will be expanded to allow for conjugate heat transfer between the burning grain ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  7. Anion Exchange Polymer Membranes Based on Polyoctahedral Silsesquioxanes for Alkaline Fuel Cells

    SBC: HYBRID PLASTICS            Topic: OSD10EP6

    Polyhedral silsesquioxanes (POSS) will be modified using chloromethylation of aromatic POSS cages. These cages will then be co-cast, using solvent, with chloromethylated polysulfones and subsequently quaternized with monofunctional and difunctional trialkylamines in order to render crosslinked films containing the cage-structures. Subsequent alkalization will form anion exchange membranes with hi ...

    SBIR Phase I 2011 Department of DefenseNavy
  8. High Energy Density and High Power Density Thermal Energy Storage

    SBC: Rocky Research            Topic: AF103163

    Thermal energy storage for load smoothing can be beneficial in applications having large transient heat load compared to steady-state heat rejection. Laser weapons and high-power microwave generators are examples where TES can help. Ammoniated complex compound systems can provide heat absorption due to exothermic dissociation of the complex compound. Very high energy density and power density T ...

    SBIR Phase I 2011 Department of DefenseAir Force
  9. Advanced Analysis and Design Tool for Scramjet Air-frame Propulsion Integration

    SBC: Flow Modeling and Simulation            Topic: AF112004

    ABSTRACT: Flow Modeling and Simulation proposes to develop a code designated Scramjet Simulation Tool (SCRAMSIM) to provide a powerful multi-level tool suitable for tight integration into the design, test and evolution cycle. The code will be based on the HEAT3D code. SCRAMSIM will be designed to reduce risks and costs, compress schedules (short term) and enhance physics insight (long term) by ...

    SBIR Phase I 2011 Department of DefenseAir Force
  10. Advanced Thermoelectric Milli-Power Source

    SBC: CAMGIAN MICROSYSTEMS CORP            Topic: A10094

    Energy can be harvested or scavenged from many environmental sources such as: solar, wind, vibrations, temperature gradients, etc. Two common issues related to environmental energy sources are limited/unpredictable availability and limited/unpredictable quantity. This proposal examines the requirements for the efficient harvesting of energy based on the temperature gradient that exists between the ...

    SBIR Phase I 2011 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government