List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. DYNAMICALLY PROGRAMMABLE AND ADAPTIVE MULTI-BAND COMPRESSIVE IMAGING SYSTEM

    SBC: Bridger Photonics, Inc.            Topic: A11aT007

    Bridger Photonics and the University of Arizona will develop a passive multi-band compressive sensor for imaging and object recognition applications. The Army has identified a need for multi-band imagery for intelligence, surveillance and reconnaissance missions among others. Multi-band systems offer enhanced discrimination capability and the ability to perform in adverse conditions (at night, smo ...

    STTR Phase I 2011 Department of DefenseArmy
  2. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy
  3. Periodically Poled Materials for UV Generation

    SBC: ADVR, Inc            Topic: A09AT008

    Army quantum information researchers have an immediate need for improved stable, narrowband violet and UV laser sources with 10100 mW output and 10 MHz10 GHz tuning. These sources are required for numerous ion and atom qubits functions including photoionization, Doppler cooling, state initialization, and detection. The cost and complexity of currently available UV lasers hampers current efforts ...

    STTR Phase II 2011 Department of DefenseArmy
  4. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: Nevada Composites, Inc.            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  5. The Effector Trap: A New Tool for Virulence Factor Discovery

    SBC: RESODYN CORPORATION            Topic: SB111002

    The accelerating prevalence of antibiotic-resistant bacterial strains is an increasing public health problem. While the emergence of resistant strains is unavoidable, it is exacerbated by the widespread use, inappropriate prescription and misuse of antibiotics. Development of new antibiotics is slow and costly. One alternative to antibiotics is the development of antimicrobials that target the bac ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  6. WASP-III Advanced Reconnaissance Device Network (WARDN)

    SBC: MAV6            Topic: SB111004

    The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  7. Direct Plasma Production from Electric Solid Propellant for High Velocity Launch Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: SB112002

    As an alternative to double-base propellants we propose electric solid propellants (ESP) as a safe, green, higher performance alternative to double-base propellants for high velocity electro thermal chemical (ETC) canons. These new energetic materials are inherently safe, with ignition only possible via the sustained supply of electrical power and not by spark, flame or even bullet impact. A maj ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  8. Improved Thrust Termination Modeling for Solid Rocket Motors

    SBC: SIERRA ENGINEERING, INC.            Topic: MDA10022

    To improve the predictive capabilities of solid rocket motor end-of-burn phenomena, two analysis tools will be further developed. An existing engineering tool will go through continued development and validation, while an existing solid rocket ballistics model, built and demonstrated within a commercial CFD platform, will be expanded to allow for conjugate heat transfer between the burning grain ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  9. Anion Exchange Polymer Membranes Based on Polyoctahedral Silsesquioxanes for Alkaline Fuel Cells

    SBC: HYBRID PLASTICS            Topic: OSD10EP6

    Polyhedral silsesquioxanes (POSS) will be modified using chloromethylation of aromatic POSS cages. These cages will then be co-cast, using solvent, with chloromethylated polysulfones and subsequently quaternized with monofunctional and difunctional trialkylamines in order to render crosslinked films containing the cage-structures. Subsequent alkalization will form anion exchange membranes with hi ...

    SBIR Phase I 2011 Department of DefenseNavy
  10. High Speed, Watt Class Multi-access Modulators for Airborne and Spaceborne Communications

    SBC: ADVR, Inc            Topic: AF103096

    ABSTRACT: In order to achieve high data transmission rates (>40Gbps), it is necessary to use external modulators as direct diode modulation can be limited by chirping, parasitics or microwave effects. Traditional amplitude modulation is done with Mach Zehnder Interferometers or directional couplers. Unfortunately, this technology is not multi-access compatible without the introduction of multipl ...

    SBIR Phase I 2011 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government