List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. CNT Based Microstrip Plasma Limiter

    SBC: ACCURATE AUTOMATION CORPORATION            Topic: MDA10T001

    Accurate Automation Corporation will develop a carbon nanotube based microstrip plasma limiter suitable for inclusion on RF printed circuit boards used on the front-end of an X-Band phased-array receiver. This device will capitalize on the ability to use carbon nanotubes to reduce the size and cost of an RF limiter while dramatically increasing the performance. Specific attention will be focused o ...

    STTR Phase I 2011 Department of DefenseMissile Defense Agency
  2. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy
  3. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: Nevada Composites, Inc.            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  4. Laser Processing Fabrication Technology from Nano to Micro Scales for Polymer Photonics

    SBC: AppliFlex LLC            Topic: SB103004

    This project proposes to develop versatile, lithography-free technology for fabricating high-performance polymer photonic devices. This innovation utilizes laser processing to achieve low-cost, simplified production method without compromising the performance necessary for high-speed optical telecommunication devices. The proposed approach is a (a) flexible fabrication platform spanning from nano ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  5. WASP-III Advanced Reconnaissance Device Network (WARDN)

    SBC: MAV6            Topic: SB111004

    The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  6. Direct Plasma Production from Electric Solid Propellant for High Velocity Launch Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: SB112002

    As an alternative to double-base propellants we propose electric solid propellants (ESP) as a safe, green, higher performance alternative to double-base propellants for high velocity electro thermal chemical (ETC) canons. These new energetic materials are inherently safe, with ignition only possible via the sustained supply of electrical power and not by spark, flame or even bullet impact. A maj ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  7. Improved Thrust Termination Modeling for Solid Rocket Motors

    SBC: SIERRA ENGINEERING, INC.            Topic: MDA10022

    To improve the predictive capabilities of solid rocket motor end-of-burn phenomena, two analysis tools will be further developed. An existing engineering tool will go through continued development and validation, while an existing solid rocket ballistics model, built and demonstrated within a commercial CFD platform, will be expanded to allow for conjugate heat transfer between the burning grain ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  8. Wideband Scalable Multi-channel Digital Receiver/Exciter (DREX)

    SBC: UWB WIRELESS INC.            Topic: MDA10028

    In response to the proposal solicitation of''Wideband Scalable Multi-channel Digital Receiver/Exciter (DREX)', this proposal presents a phase-I research plan committing to provide a set of study and experiment results, and conceptual design of a scalable coherence method. A new framework for wideband DREX with digitalized channel mismatch compensation is proposed. In the proposed ar ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  9. Anion Exchange Polymer Membranes Based on Polyoctahedral Silsesquioxanes for Alkaline Fuel Cells

    SBC: HYBRID PLASTICS            Topic: OSD10EP6

    Polyhedral silsesquioxanes (POSS) will be modified using chloromethylation of aromatic POSS cages. These cages will then be co-cast, using solvent, with chloromethylated polysulfones and subsequently quaternized with monofunctional and difunctional trialkylamines in order to render crosslinked films containing the cage-structures. Subsequent alkalization will form anion exchange membranes with hi ...

    SBIR Phase I 2011 Department of DefenseNavy
  10. Valve Dynamics Simulation

    SBC: GLOYER-TAYLOR LABORATORIES LLC            Topic: AF093186

    A large portion of the non-recurring cost of throttling type valves is associated with the effort to evaluate the dynamics of the flow through the valve. Not only do these flow dynamics affect the structural and mechanical design of the valve, they have been shown to have an effect on the combustion stability of the rocket engine. Without a means to evaluate the valve dynamics, valve developers ...

    SBIR Phase I 2011 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government