You are here

Home » Reports

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

Displaying 1 - 10 of 74 results
 
  • Record 1 TO 74

  1. Improved Thrust Termination Modeling for Solid Rocket Motors

    SBC: SIERRA ENGINEERING, INC.            Topic: MDA10022

    This effort addresses the need for a predictive model which characterizes the motor ejecta from thrust terminated and burn-to-depletion solid rocket motors. Two models will be developed: an engineering model that provides near term predictive capability and a high fidelity model which will provide guidance to improve the engineering models. The engineering model, developed under Phase I, will be ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency

  2. An Ultra-High Carbon Steel Bonded Tungsten Carbide Material for Armor Piercing Rounds

    SBC: ADVANCED MATERIALS & DEVICES            Topic: OSD12T07

    This Small Business Technology Transfer (STTR) Phase I effort will demonstrate the feasibility of an innovative tungsten carbide (WC) metal matrix composite for use as a non-carcinogenic penetrator for armor piercing (AP) munitions for small arms. The objectives of this effort are to: 1) Mechanically compact the WC and binder powders, 2) Sinter the compacted powders into a fully dense composite, 3 ...

    STTR Phase I 2013 Department of DefenseArmy

  3. Computational Modeling of Coupled Acoustic and Combustion Phenomena Inherent to Gas Turbine Engines

    SBC: Flow Modeling and Simulation            Topic: AF131181

    ABSTRACT: Flow Modeling and Simulation, LLC (FMS), proposes to develop a computational software tool, herein designated AUG3D, that is intended to provide physics-based, multi-level, validated computational simulations of turbine engine component flow fields, particularly those associated with thrust augmentors, i.e., afterburners. This tool will be ideally suited for closely integrating physica ...

    SBIR Phase I 2013 Department of DefenseAir Force

  4. Precision ACS (PACS) for DACS Low Level ACS

    SBC: Digital Solid State Propulsion, Inc            Topic: MDA11025

    Our Precision Attitude Control System (PACS) delivers high precision attitude control for Kinetic Weapon (KW) long range target discrimination and acquisition. The PACS utilizes electrically-controlled solid propellant (ESP), an innovative propulsion technology that enables fast burn rate control, throttling, and extinguishment of thrusters, simply by controlling applied electrical current. This ...

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency

  5. Safe Solid Rocket Motor Ignition Systems for Mil. Std. 1901A Compliance Using Electric Solid Propellants and Pyrogens

    SBC: Digital Solid State Propulsion, Inc            Topic: MDA08045

    In process for public release

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency

  6. Precision ACS

    SBC: Digital Solid State Propulsion, Inc            Topic: MDA08045

    In process for public release

    SBIR Phase II 2013 Department of DefenseMissile Defense Agency

  7. Advanced Analysis and Design Tool for Scramjet Air-frame Propulsion Integration

    SBC: Flow Modeling and Simulation            Topic: AF112004

    ABSTRACT: The SCRAMSIM computer code will be able to perform analysis for engineering design, stemming from a low order Reynolds Average Navier-Stokes (RANS) to high order (4th or higher) LES using accurate subgrid scale models (SGS). It will also solve thermal non-equilibrium mechanisms, conjugated heat transfer, general finite-rate chemistry using several databases for hydrocarbon/hydrogen-air ...

    SBIR Phase II 2013 Department of DefenseAir Force

  8. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy

  9. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: NEVADA COMPOSITES INC            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency

  10. Synthetic Tissue Trainer- Development of Realistic Tissue Elements for Surgical Task Training for Mangement of Combat Injuries

    SBC: SIM-VIVO LLC            Topic: OSD10H09

    The main outcome of this proposal will be the development of a new generation of task training manikins that will provide a realistic training platform for the instruction of invasive trauma resuscitation procedures (ITRP) such as peripheral IV insertion,

    SBIR Phase I 2011 Department of DefenseDefense Health Agency
US Flag An Official Website of the United States Government