You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy
  2. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: NEVADA COMPOSITES INC            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  3. WASP-III Advanced Reconnaissance Device Network (WARDN)

    SBC: MAV6            Topic: SB111004

    The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  4. Direct Plasma Production from Electric Solid Propellant for High Velocity Launch Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: SB112002

    As an alternative to double-base propellants we propose electric solid propellants (ESP) as a safe, green, higher performance alternative to double-base propellants for high velocity electro thermal chemical (ETC) canons. These new energetic materials are inherently safe, with ignition only possible via the sustained supply of electrical power and not by spark, flame or even bullet impact. A maj ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  5. EM Emanation Reduction Technique for FPGAs

    SBC: Space Photonics, Inc.            Topic: MDA10017

    Electromagnetic emanations represent a significant potential vector of attack for FPGA designs carrying critical program information or other sensitive data or algorithms. The effort proposed here will implement and study a technique designed to dramatically limit the EM emanations from FPGAs, via a methodology that will not functionally alter target designs, and naturally lends itself to seamless ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  6. Improved Thrust Termination Modeling for Solid Rocket Motors

    SBC: SIERRA ENGINEERING, INC.            Topic: MDA10022

    To improve the predictive capabilities of solid rocket motor end-of-burn phenomena, two analysis tools will be further developed. An existing engineering tool will go through continued development and validation, while an existing solid rocket ballistics model, built and demonstrated within a commercial CFD platform, will be expanded to allow for conjugate heat transfer between the burning grain ...

    SBIR Phase I 2011 Department of DefenseMissile Defense Agency
  7. XADUR- IP in untrusted fab environments

    SBC: Space Photonics, Inc.            Topic: OSD10A08

    Space Photonics plans on using state of the art failure analysis tools to detect the differneces between the netlist sent to the untrusted foundry and the IC under evaluation. In subsequent versions, SPI plans to identify extranious features and label them for the user

    SBIR Phase I 2011 Department of DefenseArmy
  8. Anion Exchange Polymer Membranes Based on Polyoctahedral Silsesquioxanes for Alkaline Fuel Cells

    SBC: HYBRID PLASTICS            Topic: OSD10EP6

    Polyhedral silsesquioxanes (POSS) will be modified using chloromethylation of aromatic POSS cages. These cages will then be co-cast, using solvent, with chloromethylated polysulfones and subsequently quaternized with monofunctional and difunctional trialkylamines in order to render crosslinked films containing the cage-structures. Subsequent alkalization will form anion exchange membranes with hi ...

    SBIR Phase I 2011 Department of DefenseNavy
  9. High Energy Density and High Power Density Thermal Energy Storage

    SBC: Rocky Research            Topic: AF103163

    Thermal energy storage for load smoothing can be beneficial in applications having large transient heat load compared to steady-state heat rejection. Laser weapons and high-power microwave generators are examples where TES can help. Ammoniated complex compound systems can provide heat absorption due to exothermic dissociation of the complex compound. Very high energy density and power density T ...

    SBIR Phase I 2011 Department of DefenseAir Force
  10. Development of an Ultra-Low Power IC Design and Packaging Technique to Provide a Variety of Critical Anti-Tamper Safeguards

    SBC: Space Photonics, Inc.            Topic: AF103184

    Novel design methods, processes, and techniques, are needed including implementation demonstrations and subsequent security evaluations of alternative integrated circuit AT methods. These methods should provide multiple attributes of the following characteristics: a visible barrier to the underlying circuitry, electromagnetic shields to suppress or confuse radiated and conducted emissions, methods ...

    SBIR Phase I 2011 Department of DefenseAir Force
US Flag An Official Website of the United States Government