List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Reduced Cost, Repeatable, Improved Property Washout Tooling for Composite Fabrication

    SBC: Nevada Composites, Inc.            Topic: N16AT015

    Nevada Composites has developed Green-Aero(sm) toolinglightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to 370C (700F). Tools, whether single-sided or washout, have a composite-compatible CTE, provide tight tolerances, are reproducible, are stable to storage under ambient conditions, and are of affordable cost. ...

    STTR Phase I 2016 Department of DefenseNavy
  2. Autonomous Broad Spectrum Environmental Sentinels

    SBC: Nevada Nanotech Systems Inc.            Topic: A13AT017

    The goal of this program is to develop an autonomous, hover-capable, flying robot with an onboard chemical sensor chip for chemical surveillance and environmental monitoring. The key capabilities of this integrated system will be, in order of priority: 1. Real-time chemical sensing and data transfer to a base station. The final platform will detect and identify airborne chemicals using the Mole ...

    STTR Phase II 2016 Department of DefenseArmy
  3. Advanced Electromagnetic Shutter for Hypervelocity Debris Mitigation

    SBC: HYPERION TECHNOLOGY GROUP, INC.            Topic: DTRA143007

    The proposed ultra-fast shutter achieves all design requirements for hypervelocity debris mitigation in the EUV cold x-ray Z-machine experiment using a high reliability magneforming shutter which has been field tested hundreds of times under conditions very similar to the Z-pinch machine. The proposed device is based upon the electromagnetic hypervelocity debris mitigation shutter put into operati ...

    SBIR Phase I 2016 Department of DefenseDefense Threat Reduction Agency
  4. Water-washout tooling for improved high- to very-high-temperature manufacturing of SM-3 TSRM composite motor cases

    SBC: Nevada Composites, Inc.            Topic: MDA14002

    Nevada Composites has developed Green-AeroSM tooling, lightweight ceramic tooling that is stable under high pressure and long-duration cure cycles and can be washed out with water after cures to the highest resin-matrix-composite cure temperatures. The proposed Phase II program would build on the successful work in Phase I toward creation of a washout mandrel for the upper stage rocket motor of a ...

    SBIR Phase II 2016 Department of DefenseMissile Defense Agency
  5. Development of a Total Residual Oxidant Sensor Development of a Total Residual Oxidant Sensor

    SBC: HALOGEN SYSTEMS, INC.            Topic: N092152

    Recent efforts at improving shipboard operations have focused on desalination systems. One area in which manpower may be significantly reduced is in the monitoring chlorine residuals from hypochlorite enhanced streams that are used for periodic biofouling control flushes of microfiltration membranes. These are used for pretreatment of seawater prior to exposure to reverse osmosis membranes used fo ...

    SBIR Phase II 2016 Department of DefenseNavy
  6. Technologies for Modular Refrigeration

    SBC: Rocky Research            Topic: A15065

    In the proposed SBIR effort, Rocky Research is using innovative technologies developed during Phase I to further develop an Efficient, Lightweight, Multi-power, Modular, and Rugged refrigerator for the US Army. Improved vapor-compression cycle with addition of Phase-Change Material, ejectors, variable speed technology for energy efficiency, electronics for multi-power capability, Carbon fiber stru ...

    SBIR Phase II 2016 Department of DefenseArmy
  7. POSS TCP Resin System for Carbon Fiber Reinforced Composite Shipboard Applications

    SBC: HYBRID PLASTICS            Topic: N11AT014

    The proposed effort will utilize lithiated POSS in synergistic combination with commercial phosphates to achieve comparable processing characteristics and superior flame retardancy, smoke and toxicity to that of Derakane 510A. The POSS-phosphate synergist package will be formulated into a Hydrex nonhalogenated vinylester resin and superior mechanical properties (interlaminar shear strength and car ...

    STTR Phase I 2011 Department of DefenseNavy
  8. Low-Cost Tooling as Enabling Technology for Drastic Cost Reductions of DLA Parts

    SBC: Nevada Composites, Inc.            Topic: DLA10001

    The ultimate objective of the work outlined in this proposal is to develop, demonstrate and commercialize a new technology for accurate, rapid, low-cost tooling for discreet parts manufacturing of high-performance composite components. This tooling results from a new tool-production process and is suitable for prototyping, repair,

    SBIR Phase I 2011 Department of DefenseDefense Logistics Agency
  9. WASP-III Advanced Reconnaissance Device Network (WARDN)

    SBC: MAV6            Topic: SB111004

    The WASP-III Advanced Reconnaissance Device Network (WARDN) is a miniaturized VHF/UHF emitter geolocation system targeted for installation on micro-UAV platforms. The Mav6 design approach of embedded antenna design, compact RF circuit design, and load balancing the signal processing and geolocation tasks between the airborne payload and the ground unit enables significant size, weight, and power ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency
  10. Direct Plasma Production from Electric Solid Propellant for High Velocity Launch Systems

    SBC: Digital Solid State Propulsion, Inc            Topic: SB112002

    As an alternative to double-base propellants we propose electric solid propellants (ESP) as a safe, green, higher performance alternative to double-base propellants for high velocity electro thermal chemical (ETC) canons. These new energetic materials are inherently safe, with ignition only possible via the sustained supply of electrical power and not by spark, flame or even bullet impact. A maj ...

    SBIR Phase I 2011 Department of DefenseDefense Advanced Research Projects Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government