List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. GNSS Radio Occulation Receiver

    SBC: 3s Navigation (dba For            Topic: N/A

    The proposed effort is to design a space-qualified dual-frequency GPS/GLONASS receiver with enhanced capabilities for atmospheric remote sounding. While such soundings have been performed using GPS-only receivers, a space-based GPS/GLONASS receiver would be superior in terms of coverage and integrity cross- checking, as well as the ability to process the unencrypted GLONASS L2 signal. This design ...

    SBIR Phase I 1997 Department of Commerce
  2. Self-Calibration and Error Analysis for 2D Measurements

    SBC: Aracor            Topic: N/A

    Two-dimensional measurement machines, such as microlithography and computed tomography systems, are subject to distortions in the measurement field due to imperfections in their hardware and software. Certified methods to characterize and quantify such distortions are urgently needed. An innovative self- calibrating scheme is tendered which eliminates the disadvantages of previous self-calibration ...

    SBIR Phase I 1997 Department of Commerce
  3. Automated Imaging and Mapping System for AUV

    SBC: DESERT STAR SYSTEMS, LLC            Topic: N/A

    Precision underwater mapping is an important requirement of projects ranging from wreck surveys and environmental impact studies to mine clearing operations and marine science projects. Small Autonomous Underwater Vehicles (AUV) are capable platforms for mapping operations as they are easily deployed and can operate in hazardous environments. We propose the development of an Automated Imaging and ...

    SBIR Phase I 1997 Department of Commerce
  4. A Digital Library of Computer-System Security Vulnerabilities

    SBC: Interconnect Technologies            Topic: N/A

    A study will determine the feasibility of using a digital-library system for computer-system vulnerability information. The system model will draw upon advances being made in multi-agency NII digital library research projects, library science techniques being developed for digital media, and standardized WWW technologies. Technical objectives include determining how best to: 1) catalog and class ...

    SBIR Phase II 1997 Department of Commerce
  5. Self-Calibrating Theory, Procdedures & Algorithms for Calibrating Two-Dimensional Measuring and Manufacturing

    SBC: Interconnect Technologies            Topic: N/A

    Abstract not Available

    SBIR Phase I 1997 Department of Commerce
  6. Thomas Drop Net Concept

    SBC: Ocean Friendly            Topic: N/A

    The purpose of the Thomas Drop Net Concept is to introduce a new method of catching pure schools of surface feding fish with the ability to select only those schools of targeted species which are of desirable size. The method involves a helicopter deployed drop net which is lowered around a selected school of targeted species, pursed, and left floating. When the seiner arrives, they place a tr ...

    SBIR Phase II 1997 Department of Commerce
  7. Physics Based Life Prediction of Thermal Barrier Coatings in Gas Turbines

    SBC: Optimal Corp            Topic: N/A

    Innovative methods, based on thermodynamics theory, will be developed to establish a unified approach in quantifying the damage state of thermal barrier coatings (TBC) under high temperature service conditions. After surveying existing material damage models, a mechanistic model which describes rate- and temperature-dependent deformation behavior of TBC with material damage will be proposed. Spe ...

    SBIR Phase II 1997 Department of Commerce
  8. A Case-Based Reasoning Approach to Intelligent Tutoring Systems for

    SBC: Stottler Henke Associates, Inc.            Topic: N/A

    An automatic system will be developed to bring the experiences and machine shop environment of experienced machinists to Numerical Control (NC) programmers and Computer Aided Manufacturing (CAM) software operators. This Intelligent Tutoring System (ITS) will teach machining principles and how to apply them with a tailored course of instruction and remediation for use in an office or classroom. The ...

    SBIR Phase I 1997 Department of Commerce
  9. Development of Advanced Optical Diagnostic and Measurement Systems for Metals Processing Research

    SBC: STRATONICS, INC.            Topic: N/A

    Stratonics will develop a suite of non-instrusive advanced optical diagnostics and measurement systems for advanced metal processing technologies; such as stomization, spray forming, and coating. Advanced manufacturing processes are under development in industry, national laboratories, and universities to provide super alloys, aluminum, and composites in the form of billet, sheet, and plate. Thi ...

    SBIR Phase II 1997 Department of Commerce
  10. Analysis of Remote Fire Detection Using Microwave/Millimeter Wave

    SBC: WaveBand Corporation            Topic: N/A

    Lack of reliable fire warning and detection systems for urban/wildland interface, large area industrial facilities and transportation systems results each year in a loss of millions of dollars worth of property; it also endangers lives. Typical optical fire detection sensors do not work well under frequently encountered adverse atmospheric conditions and, in addition, are incapable of covering siz ...

    SBIR Phase I 1997 Department of Commerce

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government