You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Depot and Field-deployable Reconfigurable Tooling Systems for Repair, Replacement, Prototyping and Low-Rate Production of Composite Parts

    SBC: 2PHASE TECHNOLOGIES, INC.            Topic: A03045

    The company's reformable, reusable tooling tooling will be provided within a complete composites manufacturing cell that can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for repair, design and prototyping, and short-run or low rate manufacture. This Phase II project addresses the use of reformable tooling toolin ...

    SBIR Phase II 2005 Department of DefenseArmy
  2. STTR Phase I: A Process to Develop Nano-Porous Surfaces for Enhancing Heat Transfer

    SBC: ADVANCED MATERIALS & DEVICES            Topic: AM

    This Small Business Technology Transfer (STTR) Project will result in the generation of a new nano-technology specifically tailored to increase the efficiency of the boiling processes used in heat exchangers and electronics cooling hardware. Unlike traditional flat surfaces and previously investigated microporous surface (MPS) coatings, homogeneous nanoporous surfaces (NPS) offer a simple-to-manuf ...

    STTR Phase I 2005 National Science Foundation
  3. STTR Phase I: Supramolecular Proton Exchange Membranes for Fuel Cells

    SBC: ADVANCED MATERIALS & DEVICES            Topic: MI

    This Small Business Technology Transfer (STTR) Phase I project develop a new generation of proton exchange membrane (PEM) technology. The proposed project will investigate processing techniques for synthesizing polyphosphazine membranes, which are hydrogen bonded to form supramolecules. Such supramolecular interactions can be fully miscible or self organized polymeric backbones to form two or more ...

    STTR Phase I 2005 National Science Foundation
  4. SBIR Phase II: Carbon-Coated Nano-Structured Electrodes for Next-Generation Lithium-Ion Batteries

    SBC: ALTAIRNANO, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will demonstrate superior power-delivery, rapid-charge, and long cycle-life performance of prototype carbon-coated, nanoparticle-based electrodes for use in inherently safe, moderate-to-large sized lithium ion batteries of various commercial designs. The primary innovation is the use of optimally sized, arranged and assembled carbonc ...

    SBIR Phase II 2005 National Science Foundation
  5. Fine and Coourse Particulate Continuous Emissions Monitoring

    SBC: Baldwin Environmental, Inc.            Topic: N/A

    This project will demonstrate the feasibility and practicaity of applying beta attenuation monitors (BAM) to quantify hourly concentrtions of PM2.5 (particoes

    SBIR Phase I 2005 Environmental Protection Agency
  6. Delivering the Health, Environmental and Economic Benefits of Trails to Rural Americans through a High Efficiency Trail Assessment Process

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    The Universal Trail Assessment Process (UTAP) and TrailWare, software for UTAP data, were developed to obtain objective trail information. Over 700 people within Federal, State, local and non-profit agencies have been UTAP trained throughout the US. Requiring 9 to 15 person hours per mile of trail is the primary factor that limits the use of UTAP. Over 85% of rural land managers consider objective ...

    SBIR Phase II 2005 Department of Agriculture
  7. OptiFit Wheelchair Fitting System

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    DESCRIPTION (provided by applicant): There, is a high incidence of overuse injuries among manual wheelchair users. One method to prevent the development or delay the onset of injuries is to reduce the physical demand on the user during wheelchair propulsion. Configuration of the wheelchair can have a significant effect on the effort required to propel the wheelchair; however, the optimal setup re ...

    SBIR Phase I 2005 Department of Health and Human ServicesNational Institutes of Health
  8. Universal Design Guidelines for Fitness Equipment

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    DESCRIPTION (provided by applicant): People with disabilities have increased health risks as a result of a sedentary lifestyle. Limited access to fitness equipment is a primary barrier to physical activity and a significant environmental barrier to the health and well-being of people with disabilities. This project will develop design, construction and installation guidelines for the universal de ...

    SBIR Phase I 2005 Department of Health and Human ServicesNational Institutes of Health
  9. Recreation Trail Vehicle Barrier Providing Access to Personal Mobility Devices

    SBC: BENEFICIAL DESIGNS INC            Topic: N/A

    People with mobility impairments are excluded from trails, shared-use paths, parks and other public areas where barriers are erected to prevent access by motorized trail vehicles (MTVs). To ensure the safety of trail users and the integrity of the natural environment, many recreation and/or transportation trails prohibit the use of motorized vehicles. Gates and other barriers are erected at all tr ...

    SBIR Phase I 2005 Department of Agriculture
  10. SBIR Phase II: Development of an Optical Sensor for Instantaneous Detection of Bioaerosols

    SBC: CTT            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II research project addresses the development of a novel real-time bio-aerosol machine for detecting and identifying harmful bio-aerosols present in the environment. The system will use the time of flight method to determine the aerodynamic size, and the Multiphoton Laser Induced Fluorescence (MLIF) method for the identification of the fluoresc ...

    SBIR Phase II 2005 National Science Foundation
US Flag An Official Website of the United States Government