Award Data

The company's reformable, reusable tooling tooling will be provided within a complete composites manufacturing cell that can substantially reduce the time, cost and effort associated with conventional or alternative tooling while providing the flexibility for repair, design and prototyping, and short-run or low rate manufacture. This Phase II project addresses the use of reformable tooling toolin ...

DESCRIPTION (provided by applicant): World-wide public health surveys point to an increasing global health burden resulting from serious brain disorders, particularly mood-related disorders such as depression. The economic burden of depression alone is immense. Of the $83.1 billion spent in 2000 on the treatment of depression and related expenses, $26.1 billion (31 percent) were direct medical cos ...

The overall objective of the proposed Phase II STTR program is to continue optimization of properties already obtained during Phase I which established the feasibility of concept to multi-functionality for BMI polymer matrix composites along with structural capability. Throughout this 2-year effort, it is proposed to seek optimization of the composite properties. The goal is develop and demonstrat ...

ACR will develop strong tailored composite polymer formulations capable of energy release as needed for a range of structural applications. Materials developed under the Phase I effort (Fibrous Monolith formulations of iron oxide/aluminum, bismuth oxide/aluminum, Teflon/aluminum) will be used as a foundation with specific strength and density targets for intended applications. The initial effor ...

In the phase I SBIR program, Advanced Ceramics Research, Inc. (ACR), along with its partner developed an innovative manufacturing process for thermal and acoustic shielding sandwich composite components for the EFV. These panels met all thermal and weight requirements, were affordable and were close to the acoustic requirements outlined in the phase I solicitation. ACR is confident that with sui ...

ACR will develop a beryllium replacement material suitable for use in the systems manufactured by Raytheon Missile Systems, Tucson, AZ. The work will include the identification of suitable materials such as metal alloys of magnesium or other materials as seen fit based on the required material properties of stiffness, density, strength and machinability. The processing knowledge gained during th ...

This Small Business Innovation Research (SBIR) Phase II project proposes to optimize and commercialize the manufacturing of all natural biobased composites from renewable resources. Phase I research demonstrated the technical feasibility of fabricating soybean oil based composites using a selected fiber/resin polymer composite combination. The Phase II project will focus on optimization and scale ...

Over the past 10 to 15 years, there has been a move towards the integration of ¡§advanced¡¨ materials with improved performance in hostile propulsion environments. Tantalum carbide is stable to very high temperatures (~3900„aC) under non-oxidizing conditions, but is relatively soft and erodes appreciably with aluminized propellants. In an effort to improve the strength and erosion resista ...

The objective of the proposed development effort is to utilize a sensor which detects IEDs and detonation devices. The sensor detector is mounted on a small unmanned aerial vehicle (UAV) such that detection can be performed from a autonomous airborne platform ahead of a convoy or patrol, thereby reducing the risk of loss of life. A positive identification was achieved from a UAV approximately 75 ...

The Navy and other government-sponsored agencies use the P-3 aircraft. Due to the diverse missions and limited number of P-3 aircraft, the most economical and expeditious way to enhance operations and assure crew safety would be to incorporate low-cost expendable tactical unmanned air vehicles (UAV's). If UAVs were incorporated into each P-3, a load-out of sonobuoy launched UAV's with interchange ...