Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. 3 Dimensional Nano-Scale Reinforcement Architecture for Advanced Composite Structures

    SBC: 3TEX, Inc.            Topic: AF04T020

    Three-dimensional woven and braided fiber architectures provide important advantages to composites, including suppression of delamination, high damage tolerance, improved through-the-thickness properties, simplicity and cost-effectiveness of manufacturing complex composite structural components. However, in order to diversify applications and reach high volumes of utilization of these materials in ...

    STTR Phase II 2005 Department of DefenseAir Force
  3. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson's ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work introduces several nove ...

    SBIR Phase I 2005 Department of DefenseAir Force
  4. Analysis Tools for Detection and Diagnosis of Biological Threats

    SBC: ALPHA-GAMMA TECHNOLOGIES, INC.            Topic: CBD04113

    DNA microarray technology, in combination with statistical and predictive modeling tools, could be used to evaluate thousands of genes against distinct gene expression patterns induced by chemical/biological agents to provide early identification and speed therapeutic intervention. The overall objective of this Phase II effort is to leverage existing public domain resources and commercial tools t ...

    SBIR Phase II 2005 Department of DefenseOffice for Chemical and Biological Defense
  5. Advanced Commercially Available Inherently Radhard Primitive Cell Designs.

    SBC: American Semiconductor, Inc.            Topic: AF05018

    The Air Force Research Laboratory (AFRL), Military Satellite Communication (MILSATCOM), and National Aeronautics and Space Administration (NASA) have a current and future need for advanced commercially available inherently radhard primitive cell libraries to support new designs for satellites and other spacecraft. American Semiconductor Inc. proposes the use of double gated Flexfet technology for ...

    SBIR Phase I 2005 Department of DefenseAir Force
  6. Filovirus drug discovery using novel combinations of approved drugs

    SBC: APATH, LLC            Topic: CBD05119

    The goal of this proposal is find novel combinations of approved drugs for the treatment and/or prevention of infection with filoviruses. Ebola and Marburg viruses, the only filoviruses, cause an acute hemorrhagic fever syndrome which has a high mortality rate and poses a significant bio-terrorism threat. There are currently no therapeutic agents available to treat filovirus infections and the de ...

    SBIR Phase I 2005 Department of DefenseOffice for Chemical and Biological Defense
  7. Accurately Validated High-Speed Wear Prediction Code

    SBC: C-K Technologies L.L.C.            Topic: AF05289

    The technology resulting from this effort will provide a comprehensive thermomechanical/ impact wear model. This integrated model will consider the developed thermal energy due to sliding friction and impact loading of the wear surface. In addition to the development of the theoretical model, a unique bench wear fixture will be designed, fabricated, and validated. This fixture will provide varia ...

    SBIR Phase I 2005 Department of DefenseAir Force
  8. A DNA Taggant Watermarking System

    SBC: EAGLE EYE, INC.            Topic: AF04124

    Taggants are small objects used to label things or people that need to be traced. Synthetic DNA Taggants are ideal for this, since very small amounts can be detected if the sequence is known, and can be disguised by natural DNA in the environment. Known protocols for DNA amplification (e.g. PCR) allow for very sensitive DNA detection, but suffer from disadvantages: the apparatus is not very portab ...

    SBIR Phase II 2005 Department of DefenseAir Force
  9. Software for the Design and Certification of Unitized Airframe Components

    SBC: Engineering Software Research And Development, Inc.            Topic: AF05T015

    An investigation of the feasibility of commercialization of the results developed in the Center for Computational Mechanics, Washington University, St. Louis, Missouri under AFOSR Grant No. F49620-01-1-0074 entitled; "Mathematical and Computational Framework for a Virtual Fabrication Environment for Aircraft Components". The proposed project will address some of the key requirements identified in ...

    STTR Phase I 2005 Department of DefenseAir Force
  10. Improved Modeling Tools for High Speed Reacting Flows

    SBC: ENGINEOUS SOFTWARE            Topic: AF05194

    Engineous is uniquely qualified to deliver successful results to the Air Force on this project. Engineous Software is, by far, the industry leader in this area, the PIDO (Process Integration, Design Optimization) space, with over 60% of the worldwide market. Over 250 customers such as Boeing, Lockheed, NASA, Airbus, GE, Pratt & Whitney, and AFRL have achieved success with Engineous Software produc ...

    SBIR Phase I 2005 Department of DefenseAir Force
US Flag An Official Website of the United States Government