You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: ALPHACORE INC            Topic: NA

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for NIST’s 2018 solicitation for Exploratory Measurement Science Topic 9.04.02.68. The proposing team has already successfully developed and evaluated a similar printed-circuit board (PCB)-based system for NIST (ROACH2 BLAST-TNG, refer section 1.2). The goal in Phase I is therefo ...

    SBIR Phase I 2018 Department of CommerceNational Institute of Standards and Technology
  2. Intelligent Power Source Reliability Monitoring and Failure Mitigation System

    SBC: ALPHACORE INC            Topic: T3

    Alphacore Inc. will develop a high-accuracy built-in self-test (BIST) system for characterization of aging, degradation, available power and in-situ diagnosis of photovoltaic and multi-pack battery systems using low-complexity single-chip impedance spectroscopy (IS) approach. Alphacore will collaborate with Arizona State University (ASU) scientists to develop a low complexity single-chip photovolt ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  3. Bio-inspired Cellular Material Optimization for the Design of Additively Manufactured Multi-Functional Lightweight Structures

    SBC: PHOENIX ANALYSIS & DESIGN TECHNOLOGIES INC            Topic: T3

    New technologies in imaging and manufacturing, including Additive Manufacturing (AM), are opening possibilities for mimicking biological structures in a way that has been unprecedented in human history. The primary innovation proposed here is the development of a tool that generates bio-inspired, parametrically optimized cellular materials for integration into the design of Additively Manufactured ...

    STTR Phase I 2018 National Aeronautics and Space Administration
  4. Discrete Time State-Space Aeroservoelastic Modeling using FUN3D

    SBC: ZONA TECHNOLOGY INC            Topic: A1

    CFD-based reduced order modeling (ROM) has been an active research area, as they can be used directly with common linear flutter analysis tools. Among them, linearized reduced-order modeling approaches rely on linearization of the nonlinear unsteady aerodynamic flow equations, assuming that the amplitude of the unsteady motion is limited to small perturbations about the nonlinear steady-state flow ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  5. Habitat ISHM Using Non-Invasive Load Management Analytics

    SBC: MHI ENERGY INFORMATION SOLUTIONS, INC            Topic: H6

    We believe a robust approach to integrated system health management (ISHM) design is the application of redundancy. Redundancy is often thought of in terms of hardware; however, functional, analytic, and information redundancy strategies should also be considered. Modeling sensor information is invaluable for diagnostics and critical path analysis. A total system approach is an efficient means of ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  6. Tunable Single Frequency UV Laser

    SBC: ADVALUE PHOTONICS INC            Topic: S1

    Compact and rugged single-frequency pulsed UV lasers are needed for measurement of ozone and the hydroxyl radicals (OH). The determination of the concentration of OH in the atmosphere is central to the understanding of atmospheric photochemistry. The goal for this SBIR Phase program is to demonstrate and build a highly robust high-power fast-tuning single frequency pulsed UV laser near 308nm for O ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  7. Wafer Level Hybrid Interconnect Aligned (Cu/Oxide) Bonding for 3D Integration of Heterogenous (Si/GaAs) Submillimeter-Wave Arrays

    SBC: CACTUS MATERIALS, INC.            Topic: S1

    The objective of this work is to develop millimeter wave arrays with ultra-high accuracy alignment (

    SBIR Phase I 2018 National Aeronautics and Space Administration
  8. Smart Fault Management (SFM)

    SBC: TMC TECHNOLOGIES OF WEST VIRGINIA CORP            Topic: S5

    The Phase I of the SBIR “Smart Fault Management” project aims to demonstrate how the fault management process can be innovated by exploiting concepts from a combination of well-established and emerging disciplines such as Bayesian Statistics, GPU-accelerated numerical simulations, Data Science, and Machine Learning that are disrupting the current status quo in many scientific and engineering f ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  9. Flexible Radiator (FlexRAD)

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: Z2

    Paragon proposes development of Flexible Radiator (FlexRAD) technology for integration with inflatable habitats. A pumped fluid loop radiator is composed of the fluid loop tubing which carries coolant for heat exchange, facesheets which provide extended surface area for radiative heat rejection, and inlet and outlet manifolds to connect individual sets of tubing. For a radiator to be functional ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
  10. Condensate Separator for MIcrogravity Conditions (COSMIC)

    SBC: PARAGON SPACE DEVELOPMENT CORPORATION            Topic: Z2

    Paragon Space Development Corporation (Paragon) proposes the development of an advanced COndensate Separator for MIcrogravity Conditions (COSMIC). COSMIC is a full flow condensate separator designed to separate condensate from air effectively and with low power use. This technology employs Paragon’s unique and robust, low power liquid separation technology that has heritage in and has been demo ...

    SBIR Phase I 2018 National Aeronautics and Space Administration
US Flag An Official Website of the United States Government