List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Ground-based Water Vapor Profiling Lidar

    SBC: Bennett Aerospace, Inc.            Topic: 832

    The objective of Phase II is to continue our efforts from the Phase I project and perform in-depth testing of technologies critical to achieving the required level of measurement performance. The Phase II project will involve the design of the NOAA water vapor profiling lidar and testing of component parts, seeking external sources of funding for the systems (for Phase III) and further creati ...

    SBIR Phase II 2010 Department of Commerce
  2. System for Acquisition and Analysis of Energy-Based Acoustic Data for Rocket Noise

    SBC: Blue Ridge Research And Consulting, LLC            Topic: O202

    Accurate estimates of the vibroacoustic loading placed on space vehicles and payloads during launch require knowledge of the rocket noise source properties. Given the extreme nature of acoustic environments near the plume, data sufficient to characterize the noise source region have been difficult to acquire. Without these data, structures may be designed to handle an insufficient or excessive v ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  3. Flight Lossless Data Compression Electronics

    SBC: ICS LLC            Topic: T401

    Abstract There is a valid scientific data paradigm where no loss of data can be tolerated. However, transmission of raw data requires unacceptable bandwidth and storage resources such that the net data received is uncomfortably low. Lossless data compression can be used to preserve all data with no information loss and also help meet bandwidth and storage constraints. The current Universal Sou ...

    STTR Phase II 2010 National Aeronautics and Space Administration
  4. Behavior Tracking Software Enhancement and Integration of a Feedback Module

    SBC: HORIZON PERFORMANCE L.L.C.            Topic: X1101

    Horizon Performance designed a Behavior Tracking Software System to collect crew member behavior throughout a mission, giving NASA the capability to monitor behavioral patterns that may identify if crews are at increased risk related to interpersonal or psychosocial problems. Building upon the alpha version of the software developed as a part of the Phase I SBIR, the proposed software will allow c ...

    SBIR Phase II 2010 National Aeronautics and Space Administration
  5. Miniaturized Digital EVA Radio

    SBC: Bennett Aerospace, Inc.            Topic: O104

    Bennett Aerospace and Team Partners propose to develop a small, lightweight, and very power-efficient mobile radio for use on the Lunar surface. Our Team will achieve a design that meets NASA size and mass requirements while reducing power consumption by more than 90%. We will accomplish this through innovative approaches in power management and RF front end design.

    SBIR Phase I 2010 National Aeronautics and Space Administration
  6. Carbon Foam Self-Heated Tooling for Out-of-Autoclave Composites Manufacturing

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X406

    Touchstone Research Laboratory, Ltd. (Touchstone) has developed a novel and innovative Out-of-Autoclave (OOA) composites manufacturing process with an electrically heated carbon foam tooling system. Electrically Heated Tooling (EHT) utilizes a coal-based carbon foam (CFOAMREG) core that serves as both the tool substrate and the heating source for a composite part being cured. The tool heating is a ...

    SBIR Phase II 2010 National Aeronautics and Space Administration
  7. Multifunctional Metal Matrix Composite Filament Wound Tank Liners

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: X503

    Metal Matrix Composite (MMC) materials offer tremendous potential for lightweight propellant and pressurant tankage for space applications. Thin MMC liners for COPVs would have enough strength to withstand tensile loading at maximum expected operating pressure (MEOP) and compressive loading at zero pressure without buckling. Thus, performance benefits would be expected when compared to aluminum, ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  8. Enhanced Prediction of Gear Tooth Surface Fatigue Life

    SBC: Sentient Science Corporation            Topic: A209

    Sentient will develop an enhanced prediction of gear tooth surface fatigue life with rigorous analysis of the tribological phenomena that contribute to pitting failure. Advanced mixed-elastohydrodynamic lubrication (EHL) models that are capable of fully describing the tribology of the mating gear teeth will be utilized to determine the influence of surface roughness and asperity interaction on th ...

    SBIR Phase I 2010 National Aeronautics and Space Administration
  9. N/A

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: N/A

    N/A

    SBIR Phase I 2000 National Aeronautics and Space Administration
  10. N/A

    SBC: TOUCHSTONE RESEARCH LABORATORY LTD (INC)            Topic: N/A

    N/A

    SBIR Phase I 2000 National Aeronautics and Space Administration

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government