List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Bottom Water Temperature and Pressure Sensor with Real-time Readout

    SBC: Advanced Design Consulting USA, Inc.            Topic: 834

    Monitors that are currently used to periodically record bottom water temperatures cannot be read by the lobstermen who use them. In addition, current monitors make no provision for recording changes in depth if they are redeployed in a different location. The specific aim of this proposal is to develop a sensor that will measure water temperature and pressure hourly and will be readable by a rad ...

    SBIR Phase I 2004 Department of Commerce
  2. Use of a Genetically Modified Organism To Assess Sewer Line Integrity

    SBC: BioTrackers            Topic: N/A

    When sewer exfiltration leaks into the environment, the entry of fecal bacteria into groundwater and surface water increases health risks. Leaking sewers also are suspected sources of fecal contamination in many surface waters designated for total maximum daily load (TMDL) plans. Development of TMDL plans has been hindered by the lack of a reliable and cost-effective method to identify fecal con ...

    SBIR Phase I 2004 Environmental Protection Agency
  3. Corrosion and Wear Resistant Coatings From Recycled Industry Waste

    SBC: Environmental Abrasives, LLC            Topic: N/A

    Environmental Abrasives, LLC (EA) proposes to improve the environment by recycling ceramic industrial waste and using the resulting product to reduce the impact of corroded and worn-out parts, equipment, pipelines, and structures. EA will develop, characterize, and test an innovative comminuted alumina powder as a cost-effective, environmentally friendly corrosion and wear resistant coating for f ...

    SBIR Phase I 2004 Environmental Protection Agency
  4. Wafer Level Supercritical Carbon Bioxide-Based Metal Depositon for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: N/A

    This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

    SBIR Phase I 2004 Environmental Protection Agency
  5. Detecting Metals in Ambinet Particulate Matter: X-Ray Fluorescdence Analysis of High Volume Impaction Deposits

    SBC: Rupprecht& Patashnick Co., Inc.            Topic: N/A

    The design, construction and feasibility testing of X-ray fluorescence (XRF) based instrumentation capable of detecting the presence of atomic species within ambient particulate mater (PM) on near real time basis has been successful completed. The XRF analysis is made feasible for hourly ambient PM samples through the implementation of novel high volume flow impaction and post-impaction concentra ...

    SBIR Phase I 2004 Environmental Protection Agency
  6. Wireless Underwater Telemetry System for Surface Water Quality Monitoring

    SBC: VORTANT TECHNOLOGIES, LLC            Topic: N/A

    The goal of this Phase I research project is to create a product to revolutionize the planning, installation, damage resistance, and cost effectiveness of in situ, real-time water quality monitoring systems. The proposed project will develop a water quality telemetry system that eliminates the wires, cables, and above-water electronics currently needed for real-time monitoring. Using an innovati ...

    SBIR Phase I 2004 Environmental Protection Agency
  7. Metal Deposition for Microelectronics Using CO2 as a Solvent

    SBC: MiCell Technologies, Inc.            Topic: C3NCERA1

    MiCell Technologies, Inc., proposes a new process for the deposition of metallic thin films of copper, ruthenium, titanium, and other metals used as barrier layers, seed layers, and interconnects. This process would replace the current electroplating approach used in filling deep trenches and forming thin films in microelectronic circuit manufacturing. The electroplating process genera ...

    SBIR Phase I 2004 Environmental Protection Agency
  8. Detecting Metals in Ambient Particulate Matter: X-Ray Fluorescence Analysis of High Impaction Deposits.

    SBC: Rupprecht& Patashnick Co., Inc.            Topic: C3NCERA2

    The goal of this Phase I research project is to develop a prototype instrument capable of performing specialized elemental speciation of ambient particulate matter (PM) in near real time (1-hour batch collection/analyses). The prototype monitor will incorporate high-volume impaction and x-ray fluorescence technology to accomplish the stated task. Through previous research, Rupprecht & ...

    SBIR Phase I 2004 Environmental Protection Agency
  9. Wireless Underwater Telemetry System for Surface Water Quality Monitoring

    SBC: VORTANT TECHNOLOGIES, LLC            Topic: C3NCERB1

    The goal of this Phase I research project is to create a product to revolutionize the planning, installation, damage resistance, and cost effectiveness of in situ, real-time water quality monitoring systems. The proposed project will develop a water quality telemetry system that eliminates the wires, cables, and above-water electronics currently needed for real-time monitoring. Using ...

    SBIR Phase I 2004 Environmental Protection Agency
  10. Corrosion and Wear Resistant Coatings from Recycled Industry Waste

    SBC: Environmental Abrasives, LLC            Topic: C3NCERE1

    Environmental Abrasives, LLC (EA) proposes to improve the environment by recycling ceramic industrial waste and using the resulting product to reduce the impact of corroded and worn-out parts, equipment, pipelines, and structures. EA will develop, characterize, and test an innovative comminuted alumina powder as a cost-effective, environmentally friendly corrosion and wear resistant ...

    SBIR Phase I 2004 Environmental Protection Agency

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government