List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Improved Silicon Drift Detector Coincidence Rejection for Digital Pulse Processors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in Energy Dispersive x-ray Spectroscopy (EDS), has made possible x-ray event streams with input count rates in the range of 1-10 Mcps. Modern digital pulse processors are therefore required to run at fast time constants to achieve reasonable throughput; however, this causes significant coincidence artifacts to appear in the spectrum ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  2. Extended Refreshable Tactile Graphic Display (with Linear Actuation Array)

    SBC: E L I A Life Technology Inc            Topic: N/A

    New innovative technology for the visually impaired has been developed by NIST. If commercialized, it would provide refreshable tactile graphical information to the visually impaired, enabling them to compete on a more equal footing in the workplace and the education system.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  3. RBAC-Based Workflow

    SBC: Virtual Globe, Inc. (Rockwise)            Topic: N/A

    Under this proposal, Virtual Global, Inc. proposes to work with NIST to develop RBAC-BASED WORKFLOW, a workflow system that will use RBAC in a web services model as a form of middleware that can be "packaged" accessed, configured, and reused by integrating with existing trusted RBAC implementations.

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  4. Innovative Fire Measurements Using Thermal Imaging

    SBC: CRITICAL IMAGING, LLC            Topic: N/A

    The most practical arrangement for investigating moving fires within a restricted space is to use a high- resolution stand off technique. One such method that fits this description is the use of a staring infrared (IR) sensing device (i.e. imager).

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  5. Bottom Water Temperature and Pressure Sensor with Real-time Readout

    SBC: Advanced Design Consulting USA, Inc.            Topic: 834

    Monitors that are currently used to periodically record bottom water temperatures cannot be read by the lobstermen who use them. In addition, current monitors make no provision for recording changes in depth if they are redeployed in a different location. The specific aim of this proposal is to develop a sensor that will measure water temperature and pressure hourly and will be readable by a rad ...

    SBIR Phase I 2004 Department of Commerce
  6. Credential Management

    SBC: ECleide (VKD Shoppe, Inc.)            Topic: N/A

    The ability to electronically identify users and their devices is increasingly becoming an integral part of our interaction with computing platforms. Whether an operating system is contacting the manufacturer's web site to confirm its proper registration and payment today, or a cell phone is broadcasting entrance credentials to a secure physical site tomorrow, it is apparent that identifying infor ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  7. Ontology based Computational Tools for Distributed CAD

    SBC: Lateral Eye, Inc.            Topic: N/A

    CAD CAM technologies have had an immense impact on the product development process in the last two decades. Current technologies, however, have limited knowledge representation and computational capabilities to enable collaboration of design decisions beyond commercial Internet based collaboration tools. In the Phase 1 Lateral Eye proposes to develop a new framework for Knowledge Integrated comput ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology
  8. Next-generation Simulation Suite for Advanced Optical Metrology

    SBC: RSOFT DESIGN GROUP            Topic: N/A

    This proposal is aimed at developing a full software solution for the next generation advanced optical metrology. Existing simulation tools cannot meet the current and future needs of scattering-based optical metrology for semiconductor manufacturing. Our proposed work will first focus on developing an enhanced RCWA-based simulation engine with advanced algorithms for fast convergence and stabilit ...

    SBIR Phase I 2004 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government