Award Data

Automated fiber placement (AFP) of thermoplastic (TP) composite jackets around large caliber gun barrels and railgun cores has enabled a dramatic increase in lethality while meeting aggressive maneuver requirements. Automated Dynamics has played a central role in the development of TP AFP technology and its use for this application. There is a continuing need to improve safety, temperature capab ...

Drive shafts for aerospace platforms are highly loaded, stressed, fatigued, and without question must maintain their operational capabilities. A component of this importance requires a material and design that provides not only a solution to stringent design criteria, but also a high level of confidence to the people who are fielding the platform and ultimately, the end user, service men and women ...

This SBIR program specifically focuses in on innovative approaches to overcome the limitations associated with both the non-conformity of the rigid steel consolidation roller as well as building upon the individual tow control functionality of thermoplastic processing heads. Our main objective within the Phase I portion of the program was to develop and demonstrate at a high level, an innovative m ...

Advanced Acoustic Concepts (AAC) will develop a spread spectrum waveform for use with the Continuous Active Sonar (CAS). CAS uses the AN/SQS-53C as the sonar source operating at 100% duty-cycle. It then uses a Multi-Function Towed Array (MFTA) as the receiver. This is an ideal application for a spread spectrum waveform as the largest reduction in transmit power is achieved using the highest pulse ...

As the use of commercially available diver detection systems becomes more widespread, Navy divers will face a greater risk of being detected while conducting clandestine operations. If a diver is conducting an operation in enemy waters where an active diver detection system is employed, the entire mission can fail and lives can be lost if he is detected. What is needed is a portable system that ca ...

Advanced Acoustic Concepts (AAC) will develop a spread spectrum waveform for use with the existing receive-only sonobuoys. Ideally the sonar source will be constructed to operate at 100% duty-cycle. This is an ideal application for a spread spectrum waveform as the largest reduction in transmit power is achieved using the highest pulse compression which in turn is achieve through use of very high ...

Navy free-electron laser (FEL) weapon systems require robust long-lived cathodes for the electron injector. The cathodes must deliver very high bunch charge in extremely short time at high repetition rates. AES has been working with Brookhaven National Laboratory (BNL) through a Phase I NAVY SBIR and a JTO contract to develop manufacturing and physics requirements with a goal of fabricating a diam ...

DESCRIPTION (provided by applicant): It is estimated that 2 million health-care associated infections are acquired each year by hospitalized patients resulting in 90,000 deaths and about 4.5 billion in excess health care costs. A large and growing percentage of these infections can be attributed to Staphylococcus aureus and, in particular, to methicillin-resistant S. aureus (MRSA). Rapid PCR-base ...

Not Available

A novel method of fabricating carbon nanotube (CNT) reinforced polymer matrix composites is proposed. It includes growing super-aligned carbon nanotube arrays on a flat substrate, using NCSU proprietary shear pressing method to compress the grown arrays into a layer of densely packed, highly aligned CNTs inclined at an angle of several degrees to the substrate, separating the produced CNT sheet fr ...