List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  2. SBIR Phase I: SEAMLESS- Systematic Electronic Assessment Management Leading to Effective Significant Solutions

    SBC: CTS            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase I project will develop a tool to help engineering faculty design and administer assessments of engineering education. The tool will also assist in the management of assessment data to support instructional decisions for individual students, decisions on courses and programs, and accreditation decisions through the Accreditation Board for Engine ...

    SBIR Phase I 2005 National Science Foundation
  3. SBIR Phase II: Device for In-ovo Targeting and Delivery to the Early Chicken Embryo

    SBC: Embrex            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project integrates the imaging system developed in Phase I with a smart-sensor injection system that can inject or sample from the cavity underlying the early chicken embryo with high levels of accuracy accompanied with improved hatch when compared to manual methods. The Phase I work showed that it was possible to image and detect the blasto ...

    SBIR Phase II 2005 National Science Foundation
  4. SBIR Phase II: Creating Functionally Decomposed Surface Models from Measured Data

    SBC: GEOMAGIC, INC.            Topic: N/A

    This Small Business Innovation Research Phase II project deals with the problems of reconstructing complex free-form shapes from measured data. Raindrop Magic's primary interest is to produce well-structured, high-quality CAD models. Several techniques exist to reach this goal; unfortunately, automatic surfacing systems provide only rough approximations and do not capture the original design int ...

    SBIR Phase II 2005 National Science Foundation
  5. SBIR Phase II: Applications of Morse Theory in Reverse Engineering

    SBC: GEOMAGIC, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will investigate applications of Combinatorial Morse Theory in Reverse Engineering, a field that focuses on converting physical objects into a digital representation suitable for CAD, CAM, and CAE. The biggest challenge in this field is to automate the conversion process while producing a model that meets all the requirements of downs ...

    SBIR Phase II 2005 National Science Foundation
  6. SBIR Phase II: Three-Dimensional (3D) Laparoscope

    SBC: INNEROPTIC TECHNOLOGY INC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project is to develop a fully functional prototype 3-D laparoscope, which will be superior to the 2-D laparoscopes currently used in surgeries, based on laser illuminated miniaturized projector for computer generated light patterns and two cameras for acquisition of color and depth. The commercial application of this project will be in surgi ...

    SBIR Phase II 2005 National Science Foundation
  7. SBIR Phase II: Novel Bioaerosol Concentrator/Sampler for Enhanced Biosensor Performance

    SBC: ITI            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project proposes to develop a robust, generic, front-end, bio-sampler that when combined with either a wet or dry biological detector, will result in more accurate and rapid detection of hazardous airborne biological agents. While most current systems require samples to be delivered in a fluid for analysis, emerging dry detection technologi ...

    SBIR Phase II 2005 National Science Foundation
  8. SBIR Phase II: Assessment of Manufacturing and Fatigue Damage Effects in Titanium Alloys Using Induced Positron Annihilation

    SBC: POSITRON SYSTEMS, INC.            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II research project will develop a prototype Induced Positron Manufacturing Damage System (IPMDS) to be used to assess initial component quality, and manufacturing damage effects for Ti-6Al-4V and IN738 components. The IPMDS is based on the Induced Positron Annihilation technologies whose capabilities to assess alpha inclusion and fatigue damage ...

    SBIR Phase II 2005 National Science Foundation
  9. SBIR Phase II: A Dynamic Tactile Display for Visually Impaired Computer Users

    SBC: VORTANT TECHNOLOGIES, LLC            Topic: N/A

    This Small Business Innovation Research (SBIR) Phase II project will create a Dynamic Tactile Display (DTD) prototype with the look, feel, and functionality of the real-world product, and it will demonstrate that the DTD makes it easier to learn and use computers than existing screen reader technology. An in-home trial study will allow a group of users to have the DTD over an extended period of ...

    SBIR Phase II 2005 National Science Foundation

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government