List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. User-Friendly 3D Environmental Profiler AUV

    SBC: NEKTON RESEARCH LLC            Topic: 813

    We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...

    SBIR Phase I 2006 Department of Commerce
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. NANOFIBER NONWOVEN BASED AIRCREW PERSONNEL LOWERING DEVICE

    SBC: 3F, LLC            Topic: AF06020

    Nanofiber nonwoven spunbonded materials technology is adapted for use in a personnel lowering device. The resulting device will be simple, easy to use, and relatively low cost.

    SBIR Phase I 2006 Department of DefenseAir Force
  4. Single ply 3Dwoven Functionally Gradient Multi-Fiber / Multi-Matrix Composites with Thermal Management Systems

    SBC: 3TEX, Inc.            Topic: AF04249

    In composites, not only can properties vary with load direction, fiber based composites also offer the unique ability to tailor material properties locally. Localized matrix or fiber architecture changes can meet local mechanical, electrical, or thermal loads within a component or vehicle, without weight penalty or resort to additional external structures. In Phase I, the team used 3TEX 3-D wea ...

    SBIR Phase II 2006 Department of DefenseAir Force
  5. Integrally 3D Woven/3D Braided Composite Joining Elements For Ship Construction

    SBC: 3TEX, Inc.            Topic: N04093

    During Phase I, 3TEX designed universal, one-piece, 3D woven fiber preforms which can be used as either a “Butt” (H) joint or as a “P” joint as needed. Composite joints were fabricated and tested, demonstrating the benefit of the integral nature of the 3D preforms. 3D stress/strain and crack propagation analysis of composite Π-joint was performed using 3D MOSAIC code. 3D displacement, st ...

    SBIR Phase II 2006 Department of DefenseNavy
  6. Novel Structural Joining Concepts Using 3-D Textile Preforms and Composites

    SBC: 3TEX, Inc.            Topic: AF05248

    Strength and durability of commonly used bonded and bolted composite-to-composite and composite-to-metal structural joints suffer from sharp geometry variations, mismatch of elastic moduli, Poisson’s ratios, coefficients of thermal expansion and thermal conductivity of the adherends, altogether causing high stress concentration and premature joint failure. The proposed work is focused on develop ...

    SBIR Phase II 2006 Department of DefenseAir Force
  7. 3-D Fiber Reinforced, Thermally Conductive Rotor Sheaths

    SBC: 3TEX, Inc.            Topic: N06T013

    Military helicopters rotors contend with rain, ice, sand, and flying debris. To prevent damage to the expensive blade protective sheaths or coatings are applied to the leading edge of the rotor blades. A 3-D woven composite sheath with high thermal conductivity fibers running through the thickness can offer the best qualities of both metal sheaths and elastomer coatings. Infused with an elastom ...

    STTR Phase I 2006 Department of DefenseNavy
  8. Improved Miller Fasteners Based on 3-D Braided Preforms

    SBC: 3TEX, Inc.            Topic: N06033

    Miller Fasteners made from 2-D laminates represent the state of the art in joining CMC panels to metal frames. Despite its success, the extant Miller fastener design is limited by its construction from a laminate of 2-D fabric. The resultant fastener part has poor interlaminar shear strength, and its manufacture and application entails high machining costs and high material scrap rates. 3TEX, i ...

    SBIR Phase I 2006 Department of DefenseNavy
  9. Commercially Rad-hard Advanced Digital Library (CRADL).

    SBC: American Semiconductor, Inc.            Topic: AF05018

    The Air Force Research Laboratory (AFRL), U.S. Air Force and agencies like the National Aeronautics and Space Administration (NASA) have a current and future need for advanced commercially available inherently rad-hard primitive cell libraries to support new designs for satellites and other spacecraft. American Semiconductor Inc. proposes a new core cell library that can meet next generation high ...

    SBIR Phase II 2006 Department of DefenseAir Force
  10. MEMS-Based Optical Beam Steering System for Multi-Color 2D Spot Arrays

    SBC: Applied Quantum Technologies            Topic: A06T010

    Optically addressing a large number of atoms trapped in a periodic lattice would be a critical missing technology necessary to achieve scalable quantum computation. A micro-electromechanical systems (MEMS) based beam steering optical system is proposed to meet the needs of this topic. The system utilizes (a set of) tilting mirrors to create reconfigurable spots on a target of square lattice. The s ...

    STTR Phase I 2006 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government