List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. User-Friendly 3D Environmental Profiler AUV

    SBC: NEKTON RESEARCH LLC            Topic: 813

    We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...

    SBIR Phase I 2006 Department of Commerce
  2. A TEQ Based Dioxin Kit Utilizing Fluorescent Aptmers

    SBC: Eno River Labs, LLC            Topic: N/A

    Eno River Labs, LLC proposes to develop and on-site testing kit for dioxins that uses fluorescently tagged ssDNA aptamers for selective binding and subsequent screening/quantitative analysis of dioxin in soil sample. Current dioxin field test kits are immunoassay based, which are insufficiently specific and sometimes unreliable. Therefore, reliable dioxin testing requires laboratory tests, which ...

    SBIR Phase I 2006 Environmental Protection Agency
  3. A TEQ Based Dioxin Kit Utilizing Fluorescent Aptamers

    SBC: Eno River Labs, LLC            Topic: 05NCERC3

    Eno River Labs, LLC, (ERL) proposes to develop an onsite testing kit for dioxins that uses fluorescently tagged ssDNA aptamers for selective binding and subsequent screening and quantitative analysis of dioxin in soil sample.  Current dioxin field test kits are immunoassay based, which are insufficiently specific and sometimes unreliable.  Reliable dioxin testing requires la ...

    SBIR Phase I 2006 Environmental Protection Agency
  4. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  5. Wafer Level Supercritical Carbon Bioxide-Based Metal Depositon for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: N/A

    This proposal describes the application, development and commercial scale-up of a process successfully developed under EPA contract number EP-D-04-042 for the deposition of copper and copper barrier materials such as ruthenium, titanium and other metals. This process could replace CU electroplating currently used to fill deep trenches and thin film deposition in microelectronic circuit manufactur ...

    SBIR Phase II 2005 Environmental Protection Agency
  6. Wafer Level Supercritical Carbon Dioxide-Based Metal Deposition for Microelectronic Applications

    SBC: MiCell Technologies, Inc.            Topic: 04NCERP1

    This research project involves the application, development, and commercial scale up of a process for the deposition of copper and copper barrier materials such as ruthenium, titanium, and other metals. This process could replace copper electroplating currently used to fill deep trenches and thin-film deposition in microelectronic circuit manufacturing. In addition, physical vapor depo ...

    SBIR Phase II 2005 Environmental Protection Agency
  7. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government