Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. User-Friendly 3D Environmental Profiler AUV

    SBC: NEKTON RESEARCH LLC            Topic: 813

    We propose Ranger ES, a low cost, autonomous underwater vehicle (AUV) for three-dimensional profiling and water samplings of chemical, physical, and biological parameters of oceanic and fresh waters. The AUV will be programmable by point and click to analyze a volume of water continuously for the selected parameters. After returning for pickup after a day¿s run, it will download its data into a ...

    SBIR Phase I 2006 Department of Commerce
  2. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The Phase 2 objective is to provide NIST with a modular gauge head unit equipped with InsituTec's standing wave probe technology. The complete gauge head unit will be retrofitted to the NIST M48 which is one of the most precise measuring machines in the world. This unit will enable NIST to achieve the agency's program goal in dimensional metrology which is to provide microscale measurement capacit ...

    SBIR Phase II 2006 Department of CommerceNational Institute of Standards and Technology
  3. A Non-Contacting, Compliant Seal for Improved Turbine Engine Performance

    SBC: Advanced Technologies Group, Inc.            Topic: A04040

    Advanced Technologies Group, Inc, (ATG) proposes a Hybrid-Advanced-Robust- Dependable (HARD) seal that exceeds the IHPTET and VAATE program goals. The seal design proposed is for air to air applications in the turbine and compressor sections. The ATG HARD seal is a non-contacting film riding seal design that will build on patented hybrid-Brush seal success at ATG. This vanguard design, when combi ...

    SBIR Phase II 2006 Department of DefenseArmy
  4. Multifunctional Nanoscale Sensor Development for Cognitive Missiles

    SBC: AET, Inc.            Topic: A06036

    The primary objective of this SBIR program is the development of approaches that provides for passive and active circuit component manufacturing to be used in missiles and other air vehicle multifunctional skin applications. The approach of AET, Inc. is to develop nanoscale sensors that can be integrated with a silicon-based integrated circuit for incorporation into the skin of cognitive missiles ...

    SBIR Phase I 2006 Department of DefenseArmy
  5. MEMS-Based Optical Beam Steering System for Multi-Color 2D Spot Arrays

    SBC: Applied Quantum Technologies            Topic: A06T010

    Optically addressing a large number of atoms trapped in a periodic lattice would be a critical missing technology necessary to achieve scalable quantum computation. A micro-electromechanical systems (MEMS) based beam steering optical system is proposed to meet the needs of this topic. The system utilizes (a set of) tilting mirrors to create reconfigurable spots on a target of square lattice. The s ...

    STTR Phase I 2006 Department of DefenseArmy
  6. Hardware-Based Anti-Tamper Techniques

    SBC: The Athena Group, Inc.            Topic: A05136

    To meet the challenge of preventing or delaying the reverse engineering or compromise of U.S. developed technologies embedded in U.S. Army weapon systems, Athena proposes a comprehensive framework for the design of custom single-chip secure processors. This framework will enable designers to rapidly and cost-effectively produce secure, custom system-on-a-chip processors, as well as design collater ...

    SBIR Phase II 2006 Department of DefenseArmy
  7. Hardware-Based Anti-Tamper Techniques

    SBC: The Athena Group, Inc.            Topic: A05136

    To meet the challenge of preventing or delaying the reverse engineering or compromise of U.S. developed technologies embedded in U.S. Army weapon systems, Athena proposes a comprehensive framework for the design of custom single-chip secure processors. This framework will enable designers to rapidly and cost-effectively produce secure, custom system-on-a-chip processors, as well as design collater ...

    SBIR Phase I 2006 Department of DefenseArmy
  8. Prediction of the Degradation of Composite Materials for Emerging Army Facilities

    SBC: DUTTA TECHNOLOGIES            Topic: A06T027

    An innovative methodology, based on mechanistic models, will be developed for prediction of long-term (25+ years) durability of composites for the US Army’s emerging facilities in different climatic zones. Accelerated testing simulating the Army’s composites applications in various constructions and fields will validate it. Phase I will develop the basic predictive model using the in-house NOV ...

    STTR Phase I 2006 Department of DefenseArmy
  9. Flexible Transparent Conducting Films

    SBC: ECLIPSE ENERGY SYSTEMS, INC.            Topic: A04044

    Due to recent technological advancements there is a need for a family of flexible, optically transparent conducting films. Eclipse Energy Systems (Eclipse) has developed a proprietary visually transparent electrical conductor (88% transmission at 550 nm,

    SBIR Phase II 2006 Department of DefenseArmy
  10. Thermal Battery Mechanical Modeling and Simulation

    SBC: ENSER Corporation, The            Topic: A06021

    Thermal batteries are mission critical components which provide power to military weapon systems for electronics, fusing, sensing and actuation. They are typically custom designed and qualified for each specific application. ENSER has developed electrochemical and thermal models to accelerate this development process, but lacks a means of evaluating the effects of the relatively high levels of d ...

    SBIR Phase I 2006 Department of DefenseArmy
US Flag An Official Website of the United States Government